Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
FS32K142HRT0VLHT
Configuration
1 options
Configuration
22+
Available for RFQ
Technical data
Product details
20
specifications
Core information
- Product name
- NXP FS32K142HRT0VLHT
- Type
- NXP
- Unit
- Electronic Component
- Minimum package
- 800 托盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- NXP
- Electronic Component
- FS32K142HRT0VLHT
- Electronic Component
- 1
- Package
- LQFP-64(10x10)
- Electronic Component
- MCU(MCU / MPU / SOC)
- Electronic Component
- 2.3g
- CPU
- ARM Cortex-M4F
- I / O
- 58
- Electronic Component
- 1
- ADC
- 12bit
- DAC
- 8bit
- Electronic Component
- BM0265088237
- Operating Voltage
- 2.7V~5.5V
- CPU
- 80MHz
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
FS32K142HRT0VLHT 产品概述
一、概述
FS32K142HRT0VLHT 是恩智浦（NXP）面向嵌入式控制应用的32位微控制器，基于 ARM Cortex‑M4F 内核，最高主频 80 MHz。器件集成丰富的模拟与数字外设，适合要求响应速度与运算能力兼备的控制场景，如电机驱动、传感器采集及工业人机接口等。
二、核心规格
- CPU：ARM Cortex‑M4F，带浮点单元，最高主频 80 MHz。
- 存储：程序 FLASH 256 KB；片上 SRAM 32 KB。
- I/O：通用 IO 引脚 58 路，可灵活复用为多种外设接口。
- A/D/D/A：12 位 ADC（多通道采样），8 位 DAC。
- 工作电压：宽电源范围 2.7 V 至 5.5 V，便于与 3.3 V/5 V 系统兼容。
- 封装：LQFP‑64（10 × 10 mm），便于原型与量产布局。
三、外设与接口
芯片提供常见的通信与控制模块，能够满足多数嵌入式项目需求：
- UART、SPI、I2C 等串行接口，支持外设通信与调试。
- 多路定时器／PWM，适合电机控制与电源管理。
- 高精度 ADC 多通道采样，配合 8 位 DAC 可实现模拟输出与闭环控制。
- 支持片上中断控制与低功耗待机模式，利于功耗管理与实时响应。
四、电气与封装注意事项
LQFP‑64 封装适合手工焊接与常规 SMT 流程。设计时建议注意：
- 严格的电源滤波与去耦（靠近 VDD/VSS 放置陶瓷电容）。
- ADC 输入应有合适的采样缓冲与参考源，避免噪声影响精度。
- 根据工作环境确认器件温度等级与可靠性要求（如需车规级请核实 AEC 认证）。
五、典型应用
- 工业控制器、传感器数据采集与边缘处理。
- 小型电机驱动与伺服控制系统。
- 人机界面（HMI）控制板与外围设备管理。
- 需要 12‑bit 模拟采集并兼顾成本的嵌入式设备。
六、开发与使用建议
- 开发生态可使用 NXP 提供的 SDK 与 MCUXpresso，亦兼容主流编译器（Keil、IAR）。
- 调试建议使用 SWD 接口，采用分区化固件与引导加载器便于现场升级。
- 在高 EMI 或电机主回路附近布板时，注意地分割与信号线屏蔽，以保障 ADC/DAC 精度与系统稳定性。
总结：FS32K142HRT0VLHT 以 Cortex‑M4F 性能为基础，提供均衡的处理能力与外设集成，适合对实时性、模拟采集与成本有综合要求的嵌入式控制应用。在量产前应确认温度等级与认证要求，并在硬件设计上重视电源与模拟信号完整性。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
