Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
EG EG4427
Configuration
1 options
Configuration
Option 155700
Availability on request
Technical data
Product details
19
specifications
Core information
- Product name
- EG EG4427
- Type
- EG
- Minimum package
- 4000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- EG
- Electronic Component
- EG4427
- Electronic Component
- 1
- Package
- SOP-8
- Electronic Component
- Gate Driver IC
- Electronic Component
- 0.157g
- Electronic Component
- 1
- Features
- Electronic Component
- Electronic Component
- BM0225993878
- Operating Temperature
- 45℃~+125℃
- Operating Voltage
- 3V~20V
- Current(IOH)
- 1.5A
- Current(IOL)
- 1.5A
- Driver Channel Count
- 2
- (tr)
- 40ns
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
EG4427 产品概述
一、产品简介
EG4427 是屹晶微（EG）推出的双通道有刷直流电机驱动芯片，采用 SOP-8（150mil）封装，面向小型直流电机及感性负载驱动场合。芯片整合了低静态功耗与大电流推拉能力，适用于便携、电池供电及工业控制类产品。
二、关键参数
- 工作电压：3V ~ 20V
- 工作温度：-45℃ ~ +125℃
- 静态电流 Iq：1 μA（低功耗待机）
- 驱动通道数：2（独立通道）
- 拉/灌电流 IOH/IOL：±1.5 A（单通道短时推挽能力）
- 上升时间 tr：40 ns；下降时间 tf：20 ns
- 输入低电平 VIL：1.0 V（兼容低电压 MCU）
三、主要特性与优势
- 低待机电流（1 μA），适合对待机功耗敏感的便携式或电池供电系统。
- 宽工作电压范围（3–20V），可驱动多种电机与感性负载。
- 单通道高达1.5A 的瞬态推拉能力，可驱动小型马达、继电器线圈或作为功率级驱动器使用。
- 较快的开关特性（tr/tf），利于 PWM 控制，响应迅速且易于实现速度与转向控制。
- 输入门槛低（VIL=1V），与 1.8V/3.3V MCU 等兼容。
四、典型应用场景
- 小型有刷直流电机驱动（玩具、微型风扇、微型泵等）。
- 继电器或小功率执行器驱动。
- 作为 MCU 的功率级输出放大器，为电机或感性负载提供瞬态电流。
- 双通道并联用于提高短时电流能力或驱动两个独立负载。
五、封装与热设计建议
SOP-8（150mil）封装体积小，布局时需注意散热与铜箔面积。建议在 PCB 上为 VCC/OUT 引脚提供宽铜带与散热过孔或底层散热平面；对长期大电流工作场合，考虑并联外部 MOSFET 或选用带散热片的方案以降低封装结温。
六、使用注意与设计建议
- 感性负载（电机）应配合外部续流二极管、TVS 或 RC 抑制网络以抑制反向尖峰，除非芯片数据手册明确内置保护。
- 在 VCC 引脚靠近芯片位置放置去耦电容（如 0.1 μF 与 10 μF 并联），以抑制开关瞬态。
- 布线时将大电流回流路径最短化，电源地与信号地适当分区并采用星形接地或地平面。
- 根据 PWM 频率与上/下降时间选择合适频率（经验上几 kHz 到几十 kHz 常用于马达驱动），以平衡开关损耗与电磁干扰。
- 对于长期连续高电流应用，参照热阻与结温要求进行功率、温升评估与必要的散热处理。
七、总结
EG4427 以其宽电压范围、低待机电流与单通道 1.5A 的推拉能力，适合轻载至中等负载的有刷直流电机及感性负载驱动。合理的 PCB 布局、去耦及抑制措施可显著提升系统可靠性与 EMC 性能，是小型电机控制与执行器驱动的实用选择。若用于高持续电流场合，建议结合外部功率器件或并联方案以保障热性能与寿命。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
