Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PUYA P24C16C-SSH-MIR P24C16C
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- PUYA P24C16C-SSH-MIR
- Type
- PUYA
- Minimum package
- 4000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PUYA
- Electronic Component
- P24C16C-SSH-MIR
- Electronic Component
- 1
- Package
- SOP-8
- Electronic Component
- EEPROM
- Electronic Component
- 0.18g
- Electronic Component
- 1
- Electronic Component
- BM0264601945
- Electronic Component
- 16Kbit
- Operating Temperature
- 40℃~+85℃
- Operating Voltage
- 1.7V~5.5V
- Interface Type
- I2C
- Electronic Component
- 100
- Clock Frequency(fc)
- 1MHz
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
P24C16C-SSH-MIR 产品概述
一、产品简介
P24C16C-SSH-MIR 是普冉（PUYA）推出的一款16K位串行 EEPROM，完全兼容 I2C 总线协议。器件采用低功耗 CMOS 工艺，支持 16 字节页写模式，适用于需要非易失性存储的各类嵌入式与消费电子设备。封装为 SOP-8，便于表面贴装和自动化生产。
二、主要参数
- 存储容量：16 Kbit（2048 字节）
- 接口类型：I2C 兼容，时钟频率 fc 最大 1 MHz
- 页写长度：16 字节（单次页写）
- 写周期时间 Tw：典型值 5 ms
- 数据保持（TDR）：100 年
- 写入寿命（擦写次数）：100 万次
- 工作电压：1.7 V 至 5.5 V
- 工作温度：-40 ℃ 至 +85 ℃
- 封装形式：SOP-8
- 品牌：PUYA（普冉）
三、功能特点
- 硬件写保护：提供专用 WP 引脚，实现对全部或部分存储区的物理写保护，提升数据安全性。
- 噪声抑制：内置噪声抑制/滤波设计，增强在噪声环境下的可靠性与信号完整性。
- 低功耗设计：采用低功耗 CMOS 工艺，适合电池供电及节能场景。
- 标准 I2C 接口：兼容主流 MCU 与 PMIC，便于系统集成与软件移植。
四、典型应用
适用于需要可靠非易失存储且写入频次高的场景，例如：
- 工业控制参数保存、设备序列号存储
- 消费电子配置与校准数据
- 通信设备与机顶盒的用户设置
- 医疗仪器、仪表盘等对数据保持和寿命要求高的领域
五、封装与可靠性
SOP-8 封装提供良好的散热与焊接兼容性，适合大批量自动化贴装。器件在 -40 ℃ 至 +85 ℃ 的工业级温度范围内稳定工作，数据保持可达 100 年，写入耐久度可达 100 万次，满足长期可靠性要求。
六、使用建议
- 在 I2C 总线上保持合适的上拉电阻，保证 SDA/SCL 信号完整性；时钟频率可工作至 1 MHz（请按系统时序规范使用）。
- 写操作前注意页边界（16 字节页），避免跨页写导致数据覆盖。
- 需要保护关键数据时使用 WP 引脚物理锁定写入。
- 在噪声较大的环境中，建议在电源和信号线上增加适当的滤波与去耦电容以提升系统稳定性。
P24C16C-SSH-MIR 以其宽电压范围、长数据保持与高写入寿命，适配多类工业与民用应用，是追求可靠存储解决方案的优选器件。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
