Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ROQANG RVT1J220M0607
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ROQANG RVT1J220M0607
- Type
- SMD, 6.3X7.7MM
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ROQANG
- Electronic Component
- RVT1J220M0607
- Electronic Component
- 1
- Electronic Component
- 22uF
- Package
- SMD,6.3x7.7mm
- Electronic Component
- SMD Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.582g
- Electronic Component
- 1
- Electronic Component
- BM0264780404
- Electronic Component
- 2000hrs@105℃
- Operating Temperature
- 40℃~+105℃
- Current
- 53mA@120Hz
- Voltage
- 63V
- Capacitor
- 6.3mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
RVT1J220M0607 — ROQANG(容强) 22µF ±20% 63V 贴片铝电解电容 产品概述
一、产品简介
RVT1J220M0607 是 ROQANG（容强）推出的一款高压贴片铝电解电容，额定电压为 63V，额定电容 22µF，容差 ±20%。封装为 SMD，电容体尺寸 D6.3 × L7.7 mm，适配自动贴装与回流焊工艺，面向工业级电源滤波与去耦应用。
二、主要参数
- 容值：22µF
- 精度：±20%
- 额定电压：63V
- 纹波电流：53mA @ 120Hz
- 尺寸（电容体）：直径 6.3mm × 长度 7.7mm（SMD 封装）
- 工作温度：-40℃ ～ +105℃
- 额定寿命：2000 小时 @ 105℃
- 品牌/型号：ROQANG(容强) / RVT1J220M0607
三、主要特性
- 高电压耐受：63V 额定使器件可直接用于较高母线电压的滤波与储能场合。
- 小型 SMD 封装：D6.3×L7.7 的贴片体积在保证容量的同时便于高密度组装。
- 宽温范围与工业寿命：-40℃ 至 +105℃ 工作温度，2000 小时 @ 105℃ 的设计寿命满足多数工业级应用的可靠性要求。
- 低频纹波处理：在 120Hz 下额定纹波电流 53mA，适合整流后电源滤波与低频去耦场景。
四、典型应用
- DC/DC 转换器输入/输出滤波
- 工业电源与伺服驱动的旁路与稳压环路
- 高压模拟/放大电路的耦合与滤波
- 嵌入式电源模块与电源管理单元（PMU）
五、使用与焊接建议
- 焊接工艺：产品为 SMD 封装，兼容表面贴装流程，应遵循厂商推荐的回流焊温度曲线与时间，避免超过设备所能承受的峰值温度与时间累积。
- 摆放与锡膏：建议按厂方推荐焊盘设计布局，合理控制锡膏用量与焊盘尺寸，防止焊点应力导致器件变形。
- 极性注意：铝电解电容具有极性，焊装、布局时务必确认正负极方向。
- 运行注意：实际纹波电流与 ESR 随频率和温度变化，设计时应考虑频率特性和热升影响；在高纹波或高温工况下应留有裕量或并联更高纹波容量件。
六、可靠性与储存
- 使用寿命基于 105℃ 下 2000 小时测试，长期可靠性需参考应用中的实际温度与纹波条件。
- 储存环境应避光、干燥，避免长期潮湿或高温曝晒；焊接前若器件包装打开并有吸湿可能，按常规湿敏器件处理。
- 如需更高寿命或更高纹波能力，可咨询厂方更高规格产品或并联化方案。
总结：RVT1J220M0607 提供在较高工作电压下的小体积滤波解决方案，适合需要 63V 等级与工业温度、较短寿命周期（2000h@105℃）的电源应用场合。选型时请结合实际工作频率、纹波电流与热环境进行系统匹配，如需详细电气参数（如 ESR、漏电流、回流曲线与推荐焊盘），建议索取 ROQANG 官方数据手册。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
