Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Sunlord GZ1608E601TF
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Sunlord GZ1608E601TF
- Type
- SUNLORD
- Minimum package
- 4000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- SUNLORD
- Electronic Component
- GZ1608E601TF
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- Ferrite Bead
- Electronic Component
- ±25%
- Electronic Component
- 0.027g
- Electronic Component
- 1
- Channel Count
- 1
- Electronic Component
- BM0258491410
- Operating Temperature
- 55℃~+125℃
- Current
- 200mA
- @Frequency
- 600Ω@100MHz
- Resistor(DCR)
- 450mΩ
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
GZ1608E601TF 产品概述
一、概述与主要参数
GZ1608E601TF 是顺络（Sunlord）系列的高阻抗磁珠，常用于高频干扰抑制与电磁兼容（EMC）设计。主要电气参数：阻抗 600Ω @ 100MHz（额定误差 ±25%）、直流电阻（DCR）约 450mΩ、额定电流 200mA、单通道结构。工作温度范围 -55℃ 至 +125℃。封装标识为 0603（1608 公制），在实际使用中建议以官方数据表为最终依据。
二、特点与优势
- 高频阻抗高：在 100MHz 附近阻抗高达 600Ω，能有效抑制高频共模/差模噪声。
- 小型封装：0603 体积小，适合高密度板面布局与便携设备。
- 低直流压降：450mΩ DCR 在 200mA 下电压降约 90mV，功耗约 18mW，适合小电流电源滤波。
- 宽温度范围：-55℃ 至 +125℃ 适应工业级环境。
三、典型应用场景
- 移动终端与通信设备的射频线与基带电路的高频噪声抑制。
- 模拟与数字电源的入/出滤波，减小电源线上传播的高频干扰。
- 汽车电子、工业控制等对温度与可靠性有较高要求的系统（需参考车规等级数据表）。
四、使用建议与注意事项
- 布局：磁珠应靠近噪声源或干扰耦合点，串联放置效果最佳；走线应尽量短且直，避免形成大的回路面积。
- 额定电流与降额：长期工作电流建议留有余量，避免温升导致性能退化；若实际电流接近 200mA，应评估温度上升对阻抗的影响。
- 焊接与回流：遵循无铅回流曲线，避免过长高温暴露；焊后建议进行外观与电性能抽检。
- 清洗与可靠性：对溶剂和清洗工艺敏感度低，但高温高湿条件下需关注电气性能漂移。
五、选型与替代考量
- 若需要更大电流承载能力，应选择 DCR 更低或额定电流更高的型号。
- 若目标频段不同，可根据频率-阻抗曲线选择在目标频段阻抗更高的型号。
- 对阻抗误差敏感的设计，需考虑 ±25% 的容差对滤波性能的影响，并做仿真或测试验证。
六、封装与订货信息
型号：GZ1608E601TF；封装：0603（1608）；品牌：Sunlord（顺络）。在产线选型与采购时，建议索取并核对顺络的最新数据表与瓦片（reel）包装信息，以确认包装、批次与库存状态。
以上为 GZ1608E601TF 的简明技术概述与使用建议，可作为设计初期的选型参考。进一步的参数曲线、热特性与可靠性试验数据请参阅顺络官方数据手册或联系厂商技术支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
