Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ST HU2G100M-CRG12 aluminum electrolytic capacitor
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ST HU2G100M-CRG12
- Type
- ST
- Minimum package
- 450 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ST
- Electronic Component
- HU2G100M-CRG12
- Electronic Component
- 1
- Electronic Component
- 10uF
- Package
- SMD,D10xL12.5mm
- Electronic Component
- SMD Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.495g
- Electronic Component
- 1
- Electronic Component
- BM0230692710
- Electronic Component
- 5000hrs@105℃
- Operating Temperature
- 40℃~+105℃
- Voltage
- 400V
- Capacitor
- 10mm
- Capacitor
- 12.5mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
HU2G100M-CRG12 — 贴片型铝电解电容产品概述
一、产品简介
HU2G100M-CRG12 为 ST(先科) 系列高压贴片铝电解电容，额定电压 400V、容值 10µF，允许偏差 ±20%。本产品采用 SMD 封装，电容体直径 10mm，长度 12.5mm，适用于对体积及耐压有较高要求的功率电子场合。
二、主要参数
- 容值：10µF
- 精度：±20%
- 额定电压：400V
- 封装尺寸：D10 × L12.5 mm（SMD）
- 工作温度：-40℃ ~ +105℃
- 额定寿命：5000 小时 @ 105℃
三、结构与封装
本品为贴片铝电解结构，电容体小型化设计，适配自动化贴装流程。SMD 封装利于高密度布板，减少引脚长度相关的寄生参数，便于在开关电源、逆变器等高压回路中作为直流旁路或能量缓冲元件使用。
四、主要特性与优势
- 高耐压（400V），能够满足中高压直流链路需求；
- 小体积（D10×L12.5mm），便于高密度布置与轻量化设计；
- 长寿命（5000hrs@105℃），适用于要求持续工作与较长维护周期的应用；
- 宽工作温度范围，适合多种环境工况。
五、典型应用
- 开关电源（SMPS）高压滤波与旁路；
- 直流母线（DC link）能量储存与削峰；
- 功率因数校正（PFC）电路；
- 工业驱动、逆变器、LED 驱动电源等高压电源模块。
六、使用与存储建议
- 注意极性安装，避免反向电压造成失效；
- 虽为 400V 额定，请根据实际温升和寿命要求酌情降额使用；
- 焊接时遵循厂家推荐的回流温度曲线，避免长时间高温暴露；
- 存储应干燥、常温并防止潮湿与强振动，开封后尽快使用以保证性能。
七、可靠性与备注
本型号在额定温度下具有 5000 小时寿命，适合长期连续工作场合。具体在项目中选型时，应综合考虑纹波电流、周边散热条件与工作频率，必要时与厂商确认更详细的 ESR、纹波电流和冲击特性数据。
如需器件样品、详尽电气参数或封装尺寸图纸，可联系供应商或 ST(先科) 授权渠道获取完整资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
