Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Siproin SSP6206-28NR SSP6206
Configuration
1 options
Configuration
24+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Siproin SSP6206-28NR
- Type
- SIPROIN
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- 190mV@(100mA)
- Electronic Component
- SIPROIN
- Electronic Component
- 30uVrms
- Electronic Component
- SSP6206-28NR
- Electronic Component
- 1
- Package
- SOT-23
- Electronic Component
- Linear Regulator(LDO)
- Electronic Component
- 0.04g
- Electronic Component
- 1
- Electronic Component
- BM0226279342
- Operating Temperature
- 40℃~+85℃
- Operating Voltage
- 8V
- Output
- Electronic Component
- Output Voltage
- 2.8V
- Output Current
- 300mA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
SSP6206-28NR 产品概述
一、产品简介
SSP6206-28NR 是上海矽朋（Siproin）推出的一款低功耗线性稳压器（LDO），为固定输出型，输出电压为 2.8V。器件采用 SOT-23 小封装，面向对噪声、压差和待机功耗有较高要求的便携与工业应用。器件内置过流保护与短路保护，可靠性高，适合空间受限且需稳定电源的场合。
二、主要特性
- 输出类型：固定（2.8V）
- 工作电压：8V（输入侧可支持至此范围）
- 输出电流：最大 300mA
- 压差（Dropout）：190mV @ 100mA
- 静态电流（Iq）：5µA（低静态功耗，利于省电设计）
- 噪声：30µVrms
- PSRR：50dB @ 1kHz（良好的电源纹波抑制能力）
- 保护功能：过流保护、短路保护
- 输出极性：正极
- 工作温度范围：-40℃ ~ +85℃
- 封装：SOT-23，单通道
三、典型应用
- 移动设备与可穿戴电子（低功耗子系统供电）
- 电池供电设备与便携式终端
- 工业控制模块的模拟与数字混合电源
- 传感器、ADC/DAC 等对噪声敏感的前端电源
- 任何需 2.8V 稳定电源且受空间与功耗限制的场景
四、封装与引脚（通用说明）
SSP6206-28NR 提供 SOT-23 小封装，适合自动贴片工艺。常见三引脚配置为 IN、GND、OUT（请结合具体封装数据手册确认引脚排列与尺寸），便于在紧凑电路板上布置。
五、设计注意事项
- 输入端建议并联去耦电容，以降低输入纹波并提高稳定性。输出端通常需配合合适的旁路电容以保证环路稳定性，具体电容类型与容值请参考器件数据手册。
- 在高负载或短路情况下，器件会触发过流/短路保护以保护器件与负载，但长期工作在保护触发条件下会影响可靠性，应在系统层面避免持续过载。
- 热管理：在接近最大输出电流与较大压差下，注意封装功耗与PCB散热设计，保证工作温度在额定范围内。
六、器件优势与选型建议
SSP6206-28NR 以低静态电流、低噪声和较小压差为优势，适合要求待机功耗低且需稳定 2.8V 电源的应用。若系统需要更高输出电流或更低压差，请在选型时参考同系列或替代型号。购买与设计前，建议获取并阅读官方数据手册以确认所有电气与热特性参数。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
