Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
SIT SIT490EESA
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- SIT SIT490EESA
- Type
- SIT
- Minimum package
- 2500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- SIT
- Electronic Component
- SIT490EESA
- Electronic Component
- 1
- Package
- SOP-8
- Type
- Transceiver
- Electronic Component
- RS-485 / RS-422IC
- Electronic Component
- 0.216g
- Electronic Component
- 256
- Electronic Component
- 1
- Features
- Tx / Rx
- Electronic Component
- BM0258808593
- Operating Temperature
- 40℃~+85℃
- Operating Voltage
- 4.5V~5.5V
- Receiver
- 1
- Data
- 12Mbps
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
SIT490EESA 产品概述
一、产品简介
SIT490EESA（芯力特）是一款高可靠性的收发器，集成1个驱动器与1个接收器，支持全双工通信，工作电压范围为4.5V至5.5V，数据速率最高可达12Mbps，适用于对中高速差分/串行链路的接口需求。器件采用工业级工作温度（-40℃~+85℃）设计，并封装为标准SOP-8，便于于多数贴片工艺和板级布局。
二、关键规格
- 类型：收发器（1驱动/1接收）
- 工作电压：4.5V ~ 5.5V
- 数据速率：最高12Mbps
- 节点数：最多256节点（系统层面可支持的大节点拓扑）
- 通讯模式：全双工
- 静态电流：220µA（待机/静态工作条件下）
- 静电保护：±15kV（人体模型）
- 工作温度范围：-40℃ ~ +85℃
- 封装：SOP-8
三、主要特性与优势
- 低静态功耗：220µA静态电流适合需要长时间待机或低功耗预算的工业设备。
- 宽电压兼容性：4.5V~5.5V可直接与常见5V系统电源兼容，设计简单。
- 较高传输速率：12Mbps可满足多数工业现场总线和高速传感器数据传输需求。
- 强抗静电能力：±15kV ESD等级提高了产品在装配与现场环境中的可靠性。
- 工业级温度范围与标准封装：适合在严苛环境下长期稳定运行，SOP-8利于生产和维护。
四、典型应用场景
- 工业自动化现场设备与控制器间通信
- 楼宇管理与安防系统的长距离差分链路
- 仪器仪表与数据采集模块的接口收发
- 多节点分布式传感/执行系统（高节点数拓扑）
- 需要稳定抗干扰能力的嵌入式通信链路
五、设计与使用建议
- 电源去耦：VCC引脚近旁放置0.1µF陶瓷去耦电容，并辅以10µF电解或固态电容以稳定低频波动。
- 线缆与终端匹配：差分信号线应做阻抗匹配，并在链路两端配置合适终端电阻以抑制反射。
- 失效保护与偏置：在多节点网络中采用合适的失效保护与偏置方案，保证空闲总线状态的确定性。
- ESD/浪涌保护：器件自身具备±15kV人体模型ESD保护，但在高干扰环境下仍建议增加外部TVS或共模抑制器件以提升系统鲁棒性。
- 布局注意事项：差分对走线应成对、等长布线，远离高频开关电源和大电流回路；GND平面连续，减小噪声耦合。
- 热管理：SOP-8封装适合常规功耗条件，超出常规工作点时需评估PCB散热能力。
六、可靠性与质量
SIT490EESA面向工业级应用，凭借宽温度范围、可靠的静电等级与较低静态功耗，适合长期在线的工业与嵌入式系统。标准SOP-8封装利于批量生产与维护替换。
总结：SIT490EESA为一种通用性强、可靠性高的收发器解决方案，适合需要5V供电、全双工通信与中高速传输（12Mbps）且节点数较多的应用场景。在具体应用中，注意电源去耦、差分终端匹配与必要的外部保护，可获得稳定的链路性能与长期可靠性。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
