Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
SILAN SDH8594ESTR
Configuration
1 options
Configuration
Electronic Component
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- SILAN SDH8594ESTR
- Type
- SILAN
- Minimum package
- 4000 未知
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- SILAN
- Electronic Component
- SDH8594ESTR
- Electronic Component
- 1
- Package
- SOP-8-225mil-1.27mm
- Electronic Component
- AC-DC Controllers and Regulators
- Electronic Component
- 1g
- Electronic Component
- 1
- Features
- (OTP); (SCP); (OVP); (OCP)
- Electronic Component
- Electronic Component
- Electronic Component
- BM0265296133
- Electronic Component
- PFM
- Operating Voltage
- 8.5V~28V
- Isolation
- Isolated
- Transistor Voltage Rating
- 650V
- Electronic Component
- 50%
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
SDH8594ESTR 产品概述
一、产品简介
SDH8594ESTR 是士兰微（SILAN）推出的一款隔离型开关电源控制器，集成高压功率晶体管并针对离线隔离型拓扑（如反激式）进行优化。芯片工作电压范围为 8.5V 至 28V，内部功率管耐压可达 650V，最大工作占空比限制为 50%，适合高压一次侧直接驱动、具备严格安全隔离要求的场合。封装为 SOP-8-225mil-1.27mm，便于SMT 工艺组装。
二、主要特性
- 隔离型设计，适配变压器/反激等隔离拓扑；
- 宽工作电压：VCC 8.5V ~ 28V，适应不同辅助供电条件；
- 内置高压晶体管，耐压高达 650V，具备良好耐冲击能力；
- 最大占空比 50%，保证变压器/电感足够复位时间；
- 多重保护机制：过热保护（OPT）、短路保护（SCP）、过压保护（OVP）、过流保护（OCP）；
- 封装：SOP-8（225mil，1.27mm），适合常规电路板布局与散热处理。
三、功能与工作原理要点
SDH8594ESTR 在一次侧实现 PWM 控制，通过外侧变压器与光耦等实现二次侧反馈与隔离。芯片负责启动、占空比调节、软启动与稳压控制，同时内置电流检测与过流响应电路。50% 的占空比限制有利于防止铁芯饱和和提高系统稳定性。多重保护逻辑在异常工况下可快速反应，保护外部器件与负载。
四、典型应用场景
- 小功率至中功率开关电源（离线适配器、充电器）；
- 反激式隔离型 LED 驱动电源；
- 家电与工业控制中的隔离式模块电源；
- 通讯设备与消费电子的隔离型次级供电。
五、设计与使用建议
- 辅助供电应确保在 8.5V~28V 范围内稳定供给；启动电路与欠压锁定需配合设计；
- 注意变压器设计，确保在最大占空比 50% 下铁芯不过饱和，并预留足够复位时间；
- 布局时将高压开关回路与控制回路分离，缩短高电流回路走线，增大散热铜箔面积；
- 保护参数（OVP/OCP/SCP）可根据负载特性适当调整，以兼顾可靠性与误触发率；
- 在高温工况下留意 OPT 响应，必要时加装散热或提升封装热管理。
六、可靠性与优势
SDH8594ESTR 以高耐压内置功率晶体管与完备的保护功能为核心，能够在一次侧直接承受高压应力并提供稳定的功率切换控制。其隔离支持和多重保护显著提升系统安全性与抗故障能力，同时 SOP-8 封装兼顾成本与装配便利，适合大批量产业化应用。
总结：SDH8594ESTR 适合需要一次侧高压耐受、隔离输出并要求多重保护机制的中小功率开关电源方案，为设计人员在可靠性与成本之间提供平衡的选择。若需电气特性曲线、典型应用原理图或引脚定义，建议参考士兰微官方数据手册以获得精确参数与参考设计。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
