Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TE Connectivity 1735801-1
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
18
specifications
Core information
- Product name
- TE Connectivity 1735801-1
- Type
- TE CONNECTIVITY
- Minimum package
- 10000 卷
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- TE CONNECTIVITY
- Electronic Component
- 1735801-1
- Electronic Component
- 1
- Electronic Component
- Terminal Block
- Electronic Component
- 0.03g
- Electronic Component
- 1
- Electronic Component
- BM0265088356
- AWG
- 24~30
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Voltage
- 250V
- Electronic Component
- Electronic Component
- Electronic Component
- 10000
- (OD)
- 0.9mm~1.5mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TE Connectivity 型号 1735801-1 产品概述
一、产品简介
TE Connectivity（泰科电子）1735801-1 是用于信号连接的插座触点，面向小截面单股导线的可靠接触需求。该触点采用磷青铜基材、镀锡处理，适用于额定电压至 250 V（AC 或 DC）的应用，工作温度范围 -25 至 105 °C，设计用于 24–30 AWG 线规的单根导线连接。
二、主要结构与材料
- 触头材质：磷青铜（良好的弹性和导电性，机械强度高）。
- 表面处理：镀锡（Sn），提升抗氧化性能并改善焊接/接触特性。
- 导线兼容性：适配 24–30 AWG 线规；用户提供的导线截面积范围为 0.05–0.02 mm²（单根导线）。
- 绝缘外径（允许）：0.9 mm ~ 1.5 mm，便于与常见绝缘线缆配合使用。
三、电气与环境特性
- 额定电压：250 VAC / 250 VDC，适合低功率信号和控制电路。
- 工作温度：-25 °C 至 105 °C，满足多数工业、仪表和消费电子环境的温度要求。
- 适用场景以信号传输为主，强调接触可靠性与长期稳定性。
四、典型应用
适用于需要小型化、高密度信号连接的场合，例如通信设备、仪器仪表、工业控制器、车载电子（非高温区段）、测试夹具与内部子模块互联等。尤其适合在空间受限处实现单根导线到连接器的可靠接触。
五、安装与使用建议
- 导线准备：使用规定线规的单股导线，按建议剥线长度进行剥皮，避免过长造成短路或过短影响接触。
- 绝缘直径：确认线缆绝缘外径在 0.9–1.5 mm 范围内，以确保良好机械配合与绝缘间隙。
- 压接/装配：建议使用与 TE 官方配套或推荐的压接工具与配件，保证压接质量与机械强度。
- 存储与处理：保持镀锡表面清洁，避免长期潮湿环境暴露以降低接触氧化风险。
六、选择要点与注意事项
- 核对线规与实际导线截面一致，避免使用超出额定规格的粗线或多股绞线（若必须使用多股线，需采用适配化处理如端头压接）。
- 若应用涉及更高温度、腐蚀性环境或更高电流，应评估是否需要更高等级的镀层或不同材质触点。
- 在高频或精密测量场景，应关注接触电阻和接触稳定性，必要时进行实测验证。
七、结论
TE Connectivity 1735801-1 提供了在受控温度范围内对小截面单根导线进行可靠信号连接的解决方案。磷青铜基材加锡镀层兼顾导电性与防腐性，适合多种中低压信号场景。选型时请结合具体电流、电气环境与机械装配要求，选配合适的压接与线缆处理工艺，以确保长期稳定运行。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
