Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TE Connectivity 1718762-1 Connector 1718762-1
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
16
specifications
Core information
- Product name
- TE Connectivity 1718762-1
- Type
- Connector and Housing
- Minimum package
- 6000 卷
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- TE CONNECTIVITY
- Electronic Component
- 1718762-1
- Electronic Component
- 1
- Electronic Component
- Terminal Block
- Electronic Component
- 0.03g
- Electronic Component
- 1
- Electronic Component
- BM0264973648
- AWG
- 15~17
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- 6000
- (OD)
- 1.9mm~2.4mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
1718762-1 产品概述
一、产品简介
1718762-1 为 TE Connectivity（泰科电子）推出的一款插片式端子，适用于中小截面积电源与信号连接场合。该端子为可插拔设计，插片宽度为 1.2 mm（0.047 in），插片厚度为 0.62 mm（0.024 in），触头采用镀锡处理，提供可靠的电接触和良好的耐腐蚀性。端子可配套密封型连接器或装配于适配外壳，适应有环境防护需求的应用。
二、主要参数
- 线规（AWG）：15 ~ 17
- 等效导线截面积：1.0 ~ 1.5 mm²
- 允许绝缘外径（OD）：1.9 mm ~ 2.4 mm
- 插片宽度：1.2 mm（0.047 in）
- 插片厚度：0.62 mm（0.024 in）
- 触头镀层：锡（Sn）
- 体系/接口：MCON 1.2 mm（对应 1.2 mm 插片尺寸）
- 品牌：TE Connectivity（泰科电子）
三、结构与材料特性
端子主体采用导电性优良的金属基材，表面施以锡镀层以提高接触可靠性并抑制氧化。插片尺寸经过工业化设计，能够在插拔过程中保持稳定的机械接触力。可密封版本允许在端子与壳体结合处采用硅胶或热熔密封件，提升防潮、防尘性能，适合较为严苛的使用环境。
四、适用线缆与装配建议
- 适用导线：固体或多股铜导线，AWG1517（1.01.5 mm²）。
- 绝缘直径：1.9~2.4 mm 范围内的线缆可以保证良好插入定位与应力缓释。
- 装配方式：建议使用合适规格的压接/端子钳完成壳体端子的压接，保证端线与端子之间的机械与电气可靠性；必要时采用线套或护套以减小振动时的应力集中。
- 建议配件：在长期振动或潮湿环境下使用线端套管或双层绝缘套；需要密封时配合对应的密封件与壳体使用。
五、典型应用场景
- 工业设备内部电源/信号连接
- 家电与消费电子中电源线接入点
- 车载电子（非安全关键回路）及轻工业控制系统
- 需密封防护的配电或接线盒
六、使用与维护要点
- 装配前应确认导线规格与绝缘外径在允许范围内，避免因导线过细或过粗造成接触不良或应力集中。
- 压接后应进行拉力与电阻检测，确保接触电阻低且机械强度满足要求。
- 对镀锡触头，避免长期在含硫或强腐蚀性气氛中裸露，必要时选用防护涂层或密封结构。
- 插拔次数受限于端子与配合件的机械寿命，应参考具体连接器或系统的维护周期进行检修更换。
七、选型提示
- 若系统要求更高的耐腐蚀或更低接触电阻，可考虑无铅或其它镀层材料的替代型号；如需更大电流能力，应选择更大截面积或更厚插片的端子。
- 在用于密封或户外环境时，整体连接器的密封等级（IP 等级）取决于端子与壳体的配合，选型时同时确认密封件与安装工艺。
如需进一步的机械图纸、材料规范或配套插座/外壳型号，可提供具体应用场景与使用条件，我可协助筛选和匹配合适的 TE 配套件。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
