Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TE Connectivity 964971-1
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
15
specifications
Core information
- Product name
- TE Connectivity 964971-1
- Type
- TE CONNECTIVITY
- Minimum package
- 10000 袋
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- TE CONNECTIVITY
- Electronic Component
- 964971-1
- Electronic Component
- 1
- Type
- Electronic Component
- Electronic Component
- Connector Accessories
- Electronic Component
- 0.056g
- PIN
- 1
- Electronic Component
- 1
- Electronic Component
- BM0264844306
- Electronic Component
- Electronic Component
- Electronic Component
- 10000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
964971-1 产品概述
一、产品简介
964971-1 为 TE Connectivity（泰科电子）出品的一款单线密封塞（Single Wire Seal，SWS），用于在连接器腔体内为单根导线提供环境密封。密封件腔体直径为 3.6 毫米（0.142 英寸），颜色为红色，材质为硅胶，适配定时器连接器系统，工作温度范围为 -40 至 130°C（-40 至 266°F）。该密封件设计用于在汽车、电力和工业应用中提高连接器的防尘、防水和防腐蚀性能。
二、主要特点
- 单线设计：针对单根导线的腔体密封，便于逐孔安装与维护。
- 硅胶材质：具备良好的弹性与耐热性，在允许温度范围内维持密封性能与长期可靠性。
- 标准腔径：3.6 mm 的腔体直径，便于与相应插针和线缆匹配。
- 可视识别：红色外观便于装配时识别不同位置或线序。
- 宽温适应：-40 至 130°C 的工作范围适合多数汽车和工业环境。
三、典型应用场景
- 汽车用线束与传感器连接，需防水防尘的发动机舱或车身模块；
- 工业控制器、定时器及外设连接器的密封，防止湿气与灰尘侵入；
- 需要在温度波动环境中保持电气密封性的场合。
四、安装与注意事项
- 在装配前确认导线尺寸与绝缘厚度与密封腔体匹配，避免拉伤或压扁密封圈；
- 装配时确保密封件完整嵌入连接器腔体并与端子配合良好，以达到设计防护等级；
- 避免接触强腐蚀性化学品或溶剂，虽硅胶耐性良好但长期暴露可能影响性能；
- 如为关键安全系统，建议按 TE 的装配指南和检验流程进行安装与测试。
五、兼容性与采购建议
- 本型号为特定连接器系统的密封件，应与相应 TE Connectivity 定时器连接器母体/端子配套使用；
- 采购时请核对完整的连接器型号、腔体编号与线规，确保密封件尺寸与材料满足应用要求；
- 如需替换或批量采购，建议从授权分销商处获取原厂件并索取技术资料与装配说明。
该产品以简洁可靠的单线密封解决方案著称，适合需要耐温和长期密封性的连接器系统。如需更详细的物性参数或装配指导，建议查阅 TE Connectivity 的产品数据手册或联系官方技术支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
