Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TE Connectivity 1-1827863-3
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- TE Connectivity 1-1827863-3
- Type
- TE CONNECTIVITY
- Minimum package
- 100
Technical parameters
- Electronic Component
- TE CONNECTIVITY
- Electronic Component
- 1-1827863-3
- Electronic Component
- 1
- Package
- P=2mm
- Electronic Component
- 2
- Electronic Component
- (Wire-to-Board / Wire-to-Wire)
- Electronic Component
- 3.3mm
- Electronic Component
- 2.27g
- Electronic Component
- 2mm
- Electronic Component
- Electronic Component
- Electronic Component
- 1
- Electronic Component
- BM0264864548
- Operating Temperature
- 55℃~+105℃
- Socket
- 2x13P
- Electronic Component
- Electronic Component
- PIN
- 13
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
1-1827863-3 产品概述
一、产品简介
TE Connectivity（泰科）型号 1-1827863-3 为 DYNAMIC 1100D 系列的插座（Receptacle Housing），为 2×13 排、共 26 节的矩形连接器外壳。该产品为黑色塑料材质、节距（Pitch）2.00 mm、行间距（行距）3.3 mm，适用于需要高密度、可靠连接的电子设备内部连接场合。外壳不带锁扣与侧翅，结构紧凑，便于批量装配与狭小空间布置。
二、主要参数
- 插孔结构：2 × 13P（26 PIN）
- 节距（P）：2.00 mm
- 行距：3.3 mm
- 排数：2 排，每排 13 PIN
- 颜色：黑色
- 是否带锁扣/翅：不带锁扣，不带翅
- 阻燃等级：UL94 V-0
- 工作温度范围：-55 ℃ 至 +105 ℃
三、材料与可靠性
外壳材料采用符合 UL94 V-0 阻燃等级的工程塑料，满足一般电子装置对防火性能的要求。材料耐温性能支持宽温区运行（-55 ℃ ～ +105 ℃），适用于工业级、通信设备以及仪器仪表等对环境适应性要求较高的场景。连接器的设计注重结构稳定性与插拔可靠性，便于与相配的插针/排针匹配使用。
四、应用场景
该型号适合以下典型应用：
- 工业控制与自动化设备内部信号/电源连接
- 通信基站、网络设备内部模块间连接
- 仪器仪表、测试测量设备的插接模块
- 机箱内板对板、线对板的紧凑间距连接需求
五、选型与安装建议
- PCB 布局：按 2.00 mm 节距与 3.3 mm 行距设计焊盘与过孔，确保机械与电气对齐；若为插件式排针，应确认插针的公差与插入力。
- 固定与支撑：由于本体不带锁扣与翅，建议在 PCB 设计中预留机械支撑位或采用周边螺丝/卡扣固定，以提升抗振动与插拔循环期间的稳定性。
- 热与环境管理：在高温或潮湿环境中应考虑局部散热与密封防护措施，以延长使用寿命与避免接触腐蚀。
- 配对件：选用与 DYNAMIC 1100D 系列匹配的插针/插头产品以保证接触可靠性，确认镀层与额定电流满足系统需求。
六、注意事项
- 在选型时确认所需额定电流与接触电阻，若电流需求较大需选用专门的电源类连接器；本产品适合信号或小电流应用。
- 安装过程避免过度弯折线缆、避免施加侧向力于塑料外壳，防止形变导致接触不良。
- 储存与清洁时避免强酸强碱及有机溶剂直接接触塑料件，以免影响阻燃及机械性能。
七、总结
1-1827863-3 为 TE Connectivity 提供的一款紧凑型 26 位（2×13）2.00 mm 节距的插座外壳，具有良好的阻燃等级与宽温适应性，适合工业与通信等领域的内部连接。选用时应关注与配对插针的匹配性、PCB 固定方案及工作环境，确保长期稳定可靠的电气连接。若需更详细的电气与机械参数（如额定电流、插拔寿命、尺寸图），建议参考 TE 官方数据手册或咨询授权代理商获取完整规格书。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
