Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TE Connectivity 926539-1
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- TE Connectivity 926539-1
- Type
- TE CONNECTIVITY
- Minimum package
- 2000 袋
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- TE CONNECTIVITY
- Electronic Component
- 926539-1
- Electronic Component
- 1
- Electronic Component
- 1
- Electronic Component
- (Wire-to-Board / Wire-to-Wire)
- Electronic Component
- 0.472g
- Electronic Component
- 1
- Electronic Component
- BM0264981141
- Electronic Component
- PA66
- Socket
- 1x2P
- Electronic Component
- Electronic Component
- PIN
- 2
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- 2000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
926539-1 产品概述
一、产品简介
926539-1 是 TE Connectivity（泰科电子）推出的一款用于 250 系列 FASTON 快速接线端子的绝缘外壳，标识为 “250 FASTON HSG. REC. 1P NATURAL”。该件属于接线端子保护与定位件，主要用于将快速插拔的母端（receptacle）绝缘、定位并与公端匹配，实现可靠的电气连接与机械支撑。适用于需要快速拆装与维护的配线环境。
二、结构与材质
- 插孔结构：1x2P（单排，每排 2 个触点位）；
- 排数：1， 每排 PIN 数：2；
- 是否带锁扣/翅：不带锁扣、不带翅，依靠插入力和配套件的摩擦保持连接；
- 塑料材质：PA66（尼龙66），常见的工程塑料，具有良好的机械强度、耐热性和耐磨性，适合长期插拔和一般工业环境使用；
- 颜色/表面：Natural（本色/自然色），便于目视识别与批量生产一致性。
三、电气与机械特性
- 兼容性：专为 250（6.35 mm）系列 FASTON 母端设计，配合相应的压接端子可构成标准的快插连接系统；
- 电流承载：外壳本身不直接承载电流，实际电流能力取决于所选压接端子和线规；250 系列端子常见于 10–30 A 量级的低压直流或工频交流场合，具体额定需参照端子与线材规格；
- 绝缘与耐温：PA66 为常用绝缘材料，提供稳定的电气绝缘和较高的热变形温度，适合一般家电与工业控制环境；具体耐温与阻燃等级请参考官方数据表；
- 机械可靠性：单排两位设计紧凑，便于在有限空间内布线与快速维护；无锁扣设计要求在振动或拉力较大的环境中配合额外固定或应力释放措施。
四、典型应用场景
- 家用电器：洗衣机、冰箱、烘干机等需频繁维护或模块化装配的电源/控制连线；
- 电源与照明设备：开关电源、灯具模块的快速连接与模块化替换；
- 工业控制与仪表：控制柜内的辅助接线、检测线路的快速断开点；
- 商用设备与消费电子：需要标准化端子、便于现场维护和更换的场合。
五、安装与注意事项
- 选配端子：确保压接端子型号为 250 系列并与线规匹配，压接质量直接影响电气与机械性能；
- 固定方式：由于该型号不带锁扣，建议在振动或动态负载场景中设计额外的扎带、固定座或使用带锁扣的替代件以防松脱；
- 防护与散热：在高电流或高环境温度下关注散热与绝缘间距，必要时参考系统级热设计；
- 检查认证：采购前核对厂家数据表与相关认证（UL、CSA 等）以满足产品安全与法规要求。
六、选型与采购建议
在选型时，优先核对 926539-1 的机械尺寸、配套端子型号和额定电气参数；若需要锁扣、翅片或不同颜色以利识别，可咨询 TE 或查找该系列的相近备选件。为保证可靠性，建议同时采购配套的压接端子并使用合格的压接工具，严格按线规与工艺规范操作。若有特殊环境（高温、强振、潮湿等），请获取完整数据表与认证文件以确认适用性。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
