Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TE Connectivity 5-962885-1
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
17
specifications
Core information
- Product name
- TE Connectivity 5-962885-1
- Type
- TE CONNECTIVITY
- Minimum package
- 9000 卷
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- TE CONNECTIVITY
- Electronic Component
- 5-962885-1
- Electronic Component
- 1
- Electronic Component
- Terminal Block
- Electronic Component
- 0.03g
- Electronic Component
- 1
- Electronic Component
- BM0264858443
- AWG
- 22~24
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- 9000
- Electronic Component
- 0.25~0.35
- (OD)
- 1.1mm~1.6mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TE Connectivity 5-962885-1 插座端子 产品概述
一、产品简介
TE Connectivity 型号 5-962885-1 为适用于 24–22 AWG（线径 0.25–0.35 mm²）电线的插座端子（female receptacle）。该端子为可密封结构，触头镀锡（Sn），插片宽度与厚度均为 0.63 mm（0.025 in），适配标准 0.025 in 插片/叉片接触件。设计用于线对板或线对公插片的可靠电气连接场合。
二、关键规格
- 适用线规：AWG 22–24（0.25–0.35 mm²）
- 允许绝缘外径（OD）：1.1 mm–1.6 mm
- 插片宽度：0.63 mm（0.025 in）
- 插片厚度：0.63 mm（0.025 in）
- 触头镀层：锡（Sn）
- 型式：插座（female）端子，支持密封化外壳使用
三、材料与电镀
触头采用导电性良好的铜合金基材，表面经锡（Sn）镀层处理。锡镀层兼顾成本与焊接/可焊性，适合常规环境和组装工艺；在腐蚀性较强或高可靠性要求的应用中需评估是否需改用金镀或采取额外防护措施。端子本体与绝缘密封配合需使用相容的密封件以确保防护等级。
四、应用场景
- 汽车线束中低电流信号/供电连接（配合合适密封外壳）
- 工业传感器、执行器的线对连接
- 家用电器、白色家电内部连接
- 通讯设备和测试夹具中与 0.025 in 插片配合的配接点
五、装配与使用建议
- 推荐使用与该端子匹配的专业压接钳与模具，控制压接质量以保证机械拉力与电阻稳定性。
- 线材以细股绞合铜线为主；剥线长度与压接程序请参照 TE 的具体装配说明或样品验证。
- 在密封应用中，确保端子与密封件及外壳配合良好，避免密封位移导致进水或污染。
- 触头为锡镀，避免在强腐蚀环境长期裸露使用，必要时采用密封或额外涂覆保护。
六、兼容性与替代配对
该端子适配标准 0.025 in（0.63 mm）宽度/厚度的公插片或刀片式接触件。选择配套外壳、壳针或插头时应确认插片间距、定位孔与密封孔的几何匹配，以保证插拔力和防护性能。对于更高耐腐蚀或低接触电阻要求，可考虑 TE 的金镀或其他表面处理系列产品作为替代。
七、质量与验收要点
- 检查压接后的线头外观与绝缘止动位置，确保无过度裸露或被切伤。
- 执行拉力测试与接触电阻检测，确认满足设计规范要求。
- 密封件装配后建议做湿热/耐水试验以验证密封可靠性。
总结：5-962885-1 为面向中小电流、需要密封保护且与 0.025 in 插片配合的插座端子，适用于汽车、工业和消费电子等多种场景。选型与装配时重点关注压接质量、密封配合与表面镀层对环境耐受性的适配。若需更详细的装配参数、额定电流或环境试验数据，建议参考 TE 官方数据手册或索取样品做现场验证。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
