Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TOREX XC6230H001QR-G LDO Regulator XC6230H001QR
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- TOREX XC6230H001QR-G
- Type
- TOREX
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- 520mV@(2A)
- Electronic Component
- TOREX
- Electronic Component
- XC6230H001QR-G
- Electronic Component
- 1
- Package
- SOP-8FD
- Electronic Component
- Linear Regulator(LDO)
- Electronic Component
- 0.207g
- Electronic Component
- 1
- Features
- Current; Output
- Electronic Component
- BM0227791710
- Operating Temperature
- 40℃~+105℃@(Ta)
- Operating Voltage
- 6V
- Output
- Electronic Component
- Output Voltage
- 1.2V~5V
- Output Current
- 2A
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XC6230H001QR-G 产品概述
一、概述
XC6230H001QR-G 是 TOREX（特瑞仕）推出的一款高性能线性稳压器（LDO），单路输出、可调型，最大输出电流可达 2A。器件采用 SOP-8FD 封装，适用于对电源噪声、瞬态响应和系统保护有较高要求的电源管理场合。其低静态电流、高 PSRR 以及多种保护功能，使其在便携设备、工业与通讯系统中表现稳定可靠。
二、主要规格
- 输出极性：正极
- 输入工作电压：最高 6V
- 输出电压范围：可调 1.2V ～ 5.0V
- 最大输出电流：2A
- 压差（Dropout）：520mV @ 2A
- 电源纹波抑制比（PSRR）：70dB @ 1kHz
- 静态电流（Iq）：83µA
- 工作温度范围：-40℃ ～ +105℃（Ta）
- 输出类型：可调，单通道
- 封装：SOP-8FD（8 引脚）
三、功能特性
- 使能控制（Enable）：通过 EN 引脚可快速使能/关闭输出，便于系统电源管理。
- 可调限流：支持外部设置或内部限流，实现过载保护与受控启动。
- 热关断（Thermal shutdown）：温度异常时自动关断，防止器件损坏。
- 过流保护与短路保护：在大电流或短路条件下限制输出，保证系统安全。
- 反极性电流保护：防止输出端向输入端回流造成损害。
- 输出放电（Output discharge）：关断时可快速将输出电压放低，加快系统复位或断电动作响应。
四、典型应用场景
- 电池供电设备与便携终端（需低压差与低噪声电源）
- 摄像模组、电源前端与模拟电路供电（高 PSRR 要求）
- 工业控制与嵌入式系统（需抗短路、热保护与可靠性）
- 通讯设备与传感器节点（稳定输出与快速响应）
五、典型设计与布局建议
- 输入/输出端建议使用低 ESR 陶瓷电容，靠近芯片引脚放置以保证稳定性与瞬态响应。
- 在高电流应用下，考虑输入侧增加滤波或去耦，以减小电源线压降与纹波。
- EN 与调整引脚布线应尽量短且避免与噪声源相邻，必要时加旁路电容或滤波。
- SOP-8FD 封装散热能力有限，高功耗工况下需通过 PCB 铜箔与散热填充、过孔热连接底层散热铜箔以降低结温。
六、可靠性与热管理
在 2A 输出与较高输入差压时，器件功耗显著，应评估热阻与最大结温。建议在长时间大电流工作或高环境温度下采用适当散热设计（加大 PCB 散热区、使用多层过孔互连），并结合器件的热关断功能，保证系统长寿命与稳定运行。
XC6230H001QR-G 以其较低静态电流、高 PSRR、全面的保护机制和可调输出特性，适合要求噪声低、可靠性高的中高功率线性稳压场合。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
