Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TUOZHAN TZ-P4-1204RYGTS1-1.5TA
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- TUOZHAN TZ-P4-1204RYGTS1-1.5TA
- Type
- SMD, 1.5X3.2MM
- Minimum package
- 3000 编带
Technical parameters
- Power
- 60mW
- Electronic Component
- Electronic Component
- Electronic Component
- TUOZHAN
- Electronic Component
- TZ-P4-1204RYGTS1-1.5TA
- Electronic Component
- 1
- Package
- SMD,1.5x3.2mm
- Electronic Component
- 573nm~578nm；620nm~625nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.031g
- Electronic Component
- 1
- LED
- 50mcd；200mcd
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0264920813
- Operating Temperature
- 40℃~+80℃
- Current
- 20mA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TZ-P4-1204RYGTS1-1.5TA 产品概述
一、产品简介
TZ-P4-1204RYGTS1-1.5TA 是拓展光电（TUOZHAN）推出的一款双色 SMD 指示灯，封装尺寸 1.5×3.2mm，采用共阳极（二极管共阳）设计，颜色为红色与黄绿色。透镜为无色透明，发光角度宽达 120°，适合需要大视角、高可视性的面板与指示场合。
二、主要电光参数
- 发光颜色：红色（620–625nm）、黄绿色（573–578nm）
- 正向电压 Vf：红色约 2.3V，黄绿色约 2.4V
- 正向电流 If：20mA（最大工作电流）
- 功率：60mW（最大耗散）
- 发光强度（典型）：红色约 50mcd，黄绿色约 200mcd
- 发光角度：120°（半值角）
- 工作温度：-40℃ 至 +80℃
三、封装与装配特性
- 封装形式：SMD 小型封装，外形尺寸 1.5×3.2mm，适合高密度 PCB 布局
- 载带方式：侧贴（便于自动贴片机取料）
- 结构特性：共阳极配置简化了双色驱动电路，便于节省引脚与布线空间
- 透镜：无色透明，保证原色还原与均匀出光
四、典型应用
- 小家电面板指示（如电源、模式指示）
- 仪器仪表状态提示（设备运行/报警）
- 玩具与消费电子装饰性指示
- 电子烟等便携式设备的状态指示
五、设计与使用建议
- 驱动：建议每色加限流电阻或使用恒流源驱动，If ≤ 20mA；若需延长寿命或降低发热，可采用 5–10mA 的中低电流工作点。
- PCB 布局：建议为两色共阳引脚预留公共阳极接点，阴极分别走线；考虑 1.5×3.2mm 尺寸，建议参考厂方推荐的焊盘尺寸并留足锡膏量。
- 回流焊：支持标准回流工艺，建议按无铅回流曲线控制峰值温度并避免长时间高温暴露。
- 电磁兼容：在噪声环境下可在驱动端加入 RC 滤波或缓冲驱动以避免闪烁。
六、储存与可靠性注意
- 建议按 SMD 器件常规要求干燥储存，开盘后如超过厂方规定时间建议进行干燥回烘。
- 工作温度范围宽，适合室内外一般环境；高温或潮湿环境下建议做额外密封或防护。
- 注意静电防护，器件对 ESD 敏感，建议在装配与测试环节采取防静电措施。
七、品牌与采购
- 品牌：TUOZHAN（拓展光电）
- 型号：TZ-P4-1204RYGTS1-1.5TA
- 本产品以小型化、视角宽、双色共阳设计为主要卖点，适合批量自动贴片生产与多场景指示应用。如需样品、数据手册或推荐封装焊盘图，请联系供应商获取详细资料与工程支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
