Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Viking ARG06BTC5100
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Viking ARG06BTC5100
- Type
- VIKING
- Minimum package
- 5000 圆盘
Technical parameters
- Power
- 250mW
- Electronic Component
- Electronic Component
- Electronic Component
- VIKING
- Electronic Component
- ARG06BTC5100
- Electronic Component
- 1
- Package
- 1206
- Electronic Component
- SMD Resistor
- Electronic Component
- ±0.1%
- Electronic Component
- 0.03g
- Electronic Component
- 510Ω
- Electronic Component
- 1
- Electronic Component
- BM0264480898
- Operating Temperature
- 55℃~+155℃
- Operating Voltage
- 200V
- Electronic Component
- ±25ppm/℃
- Resistor Type
- Resistor
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
ARG06BTC5100 产品概述
一、产品简介
ARG06BTC5100 是 Viking（光颉）推出的一款高精度贴片薄膜电阻，阻值为 510Ω，封装为 1206（英制：3216）。该器件专为精密测量、信号调理和高可靠性应用设计，兼顾高精度与良好温度稳定性，适合 SMT 自动化生产线使用。
二、主要规格
- 电阻类型：薄膜电阻（Thin Film）
- 阻值：510 Ω
- 精度：±0.1%
- 额定功率：250 mW（室温标称）
- 最大工作电压：200 V
- 温度系数（TCR）：±25 ppm/℃
- 工作温度范围：-55 ℃ ~ +155 ℃
- 封装：1206（SMD）
- 品牌：Viking（光颉）
三、产品特点与优势
- 高精度：±0.1% 的初始精度适用于精密分压、增益设定和校准电路，减少后续调校工作量。
- 低温漂：±25 ppm/℃ 的温度系数保证在宽温区间内阻值稳定，有利于高精度测量与计量系统。
- 宽工作温度：-55 ℃ 至 +155 ℃，适应工业级和恶劣环境应用。
- 良好的功率与电压承受能力：1206 尺寸下 250 mW 的额定功率和 200 V 的工作电压，满足多数精密小功率电路需求。
- 薄膜工艺：相比厚膜，薄膜电阻具有更低的噪声、更好的线性和更优的长期稳定性。
- 适配 SMT 工艺：封装与引脚设计适合回流焊和自动贴装，利于批量生产。
四、典型应用场景
- 仪器仪表与精密测量设备：电压分压、参考电阻、传感器信号调理。
- 通信与测试设备：增益设定、阻抗匹配、滤波网络。
- 工业控制与自动化：反馈回路、电流检测前端（配合分流电阻使用）等。
- 医疗设备与航空航天：要求高可靠性与稳定性的低功耗电路。
五、设计与安装建议
- 功率与散热：在实际电路中建议适当降额使用，避免长时间满载；合理布局周边铜箔面积以控制局部升温，必要时采用散热或通孔过渡改善热传导。
- 布局与焊接：兼容常见无铅回流焊工艺；贴片时避免对电阻主体施加过大机械应力，焊盘设计应符合 1206 标准推荐尺寸并留有热膨胀余量。
- 温漂与配对：在要求更高的匹配或漂移控制电路，建议在同批次或同温区筛选配对电阻使用，以降低系统误差。
- 存储与搬运：避免受潮和机械冲击，贴片前建议按常规元件加工规范存放于干燥环境。
六、采购与封装信息
ARG06BTC5100 可提供适合 SMT 生产的盘带卷装（Tape & Reel），便于自动化贴装与追踪管理。若需样品、技术数据手册（SMD 封装尺寸图、温度功率衰减曲线、焊接工艺建议）或批量报价，请联系 Viking（光颉）授权供应商或经销商获取详细资料与最新库存信息。
总结：ARG06BTC5100 以其高精度、低温漂和工业级温度范围，成为需要稳定、精密电阻元件的电路设计的理想选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
