Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Viking CSR0204FTDV2001
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Viking CSR0204FTDV2001
- Type
- VIKING
- Minimum package
- 3000 圆盘
Technical parameters
- Power
- 250mW
- Electronic Component
- Electronic Component
- Electronic Component
- VIKING
- Electronic Component
- CSR0204FTDV2001
- Electronic Component
- 1
- Package
- MELF
- Electronic Component
- SMD Resistor
- Electronic Component
- ±1%
- Electronic Component
- 0.039g
- Electronic Component
- 2kΩ
- Electronic Component
- 1
- Electronic Component
- BM0264480935
- Operating Temperature
- 55℃~+155℃
- Operating Voltage
- 200V
- Electronic Component
- ±50ppm/℃
- Resistor Type
- Metal Film Resistor
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
CSR0204FTDV2001 产品概述
一、概述
CSR0204FTDV2001 是 Viking(光颉) 推出的高稳定性贴片金属膜电阻，采用 MELF 圆柱形封装，阻值为 2kΩ，公差 ±1%，额定功率 250mW，适用于对精度、温漂和长期稳定性有较高要求的电子系统。该器件结合金属膜材料的低噪声与 MELF 封装的热稳定特性，是精密模拟、测量与高可靠性工业应用的理想选择。
二、主要参数
- 阻值：2kΩ
- 精度：±1%
- 额定功率：250mW
- 工作电压：200V
- 温度系数（TCR）：±50ppm/℃
- 工作温度范围：-55℃ ～ +155℃
- 封装：MELF（圆柱形贴片）
- 类型：金属膜电阻
- 品牌：Viking(光颉)
- 型号：CSR0204FTDV2001
三、产品特点
- 金属膜工艺带来低噪声、低失配和良好长期稳定性，适合精密电路。
- ±1% 精度与 ±50ppm/℃ 的低温漂，保证在温度变化下阻值稳定。
- MELF 封装热容量好、焊点耐受热冲击性能优异，有利于可靠性要求高的场合。
- 200V 的工作电压适配较高电压偏置的电路设计。
四、典型应用
- 精密测量与传感器前端电路
- 模拟信号处理与滤波网络
- 医疗设备、工业控制与仪表
- 高频及低噪声放大器中的偏置与反馈元件
五、使用与可靠性建议
- MELF 封装对贴装与回流工艺敏感，推荐使用对位准确的贴装程序并参考厂商回流曲线。
- 在高温环境或长期连续工作时，请参考厂方功率降额曲线并适当留余量。
- 建议在设计时考虑焊盘与散热路径，以利于热量扩散与器件寿命。
- 建议按需索取完整数据手册，结合实际应用验证温漂与耐久性。
六、封装与采购
CSR0204FTDV2001 提供标准 MELF 卷带包装，便于 SMT 生产线使用。采购时请确认批次与出厂检验报告以保证一致性与可追溯性。若需替代规格或大批量供货，可与 Viking(光颉) 经销渠道联系以获取支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
