Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
FC FL2D-30-222 FL2D
Configuration
1 options
Configuration
Option 174877
Available for RFQ
Technical data
Product details
13
specifications
Core information
- Product name
- FC FL2D-30-222
- Type
- FC
- Minimum package
- 2000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- FC
- Electronic Component
- FL2D-30-222
- Electronic Component
- 1
- Package
- DIP
- Electronic Component
- 5.5g
- Electronic Component
- 1
- Electronic Component
- BM0263518379
- Electronic Component
- Electronic Component
- Electronic Component
- 2000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
FL2D-30-222 产品概述
一、产品定位与典型应用场景
FL2D-30-222是方成（FC）品牌推出的2通道高压共模电感，核心面向中功率高压设备的电磁干扰（EMI）抑制、线路滤波需求，适配工业电源、车载电子、光伏逆变等对高压耐量、宽温适应性要求较高的场景。其双绕组结构可同时滤除两路信号的共模干扰，无需额外并联元件，是简化电路布局、提升设备EMC性能的优选元件。
二、核心电气参数详解
FL2D-30-222的电气参数精准匹配中高压滤波场景，关键参数及实际意义如下：
- 通道数：2通道
采用双绕组独立设计，可对两路信号同步进行共模滤波，避免单通道电感的额外损耗，简化PCB布局； - 电感量：[email protected]
在1.5kHz工作频率下电感量稳定为2.2毫亨，覆盖中低频段干扰（如开关电源1kHz~10kHz纹波），滤波效果明确； - 额定电流：3A（连续）
25℃环境下连续工作的最大允许电流，绕组采用低电阻漆包线，长期运行无过热风险，适配100W~500W中功率设备； - 耐电压特性：2.25kV（额定绝缘电压）、2.35kV（峰值）
优异的高压绝缘能力，可满足220V/380V交流系统或48V~1000V高压直流设备的绝缘要求，避免击穿风险； - 直流电阻（DCR）：50mΩ
极低直流电阻大幅降低电流损耗，减少发热，提升设备整体效率，适合长时间连续工作场景。
三、物理特性与封装规格
FL2D-30-222采用DIP-4P直插封装，物理尺寸为15mm（长）×7.5mm（宽），属于紧凑型设计：
- 直插4引脚布局：对应双绕组输入输出端，接线清晰，便于手工焊接或自动化插件工艺；
- 小尺寸适配：15×7.5mm封装可轻松集成到PCB紧凑空间，满足车载OBC、微型逆变器等小型化设备需求。
四、环境适应性与可靠性
产品针对极端环境优化，可靠性突出：
- 宽温工作范围：-40℃~+125℃
覆盖工业低温（北方冬季户外）、高温（发动机舱、光伏柜内）场景，无需额外散热设计； - 方成（FC）品牌保障
经过温度循环（-40℃125℃循环500次）、振动（102000Hz，2g加速度）、冲击（100g，11ms）等测试，确保工况下性能稳定。
五、优势与适用场景补充
FL2D-30-222的核心优势在于**“高压耐量+宽温+低损耗”的平衡**，典型适用场景包括：
- 工业开关电源：抑制共模干扰，满足EMC认证要求；
- 光伏逆变器：滤波电网侧高频干扰，保护功率模块；
- 车载充电机（OBC）：高压滤波（400V直流），适配车载宽温环境；
- 医疗设备：高绝缘耐电压满足GB9706等安全标准。
总结而言，FL2D-30-222是专为中高压中功率场景设计的高可靠2通道电感，参数精准、封装紧凑、环境适应性强，可有效提升设备EMC性能与稳定性。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
