Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-502UGD LED XL-502UGD
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-502UGD
- Type
- XINGLIGHT
- Minimum package
- 1000 圆盘
Technical parameters
- Power
- 70mW
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-502UGD
- Electronic Component
- 1
- Package
- Through-hole, D=5mm
- Electronic Component
- 520nm~530nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.251g
- Electronic Component
- 1
- LED
- 12cd
- LED
- 25°
- LED
- Electronic Component
- Electronic Component
- BM0224625865
- Electronic Component
- 520nm
- Operating Temperature
- 25℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-502UGD — F5 翠绿色直插发光二极管产品概述
一、产品简介
XL-502UGD 是成兴光（Xinglight）推出的一款 5mm 圆形直插发光二极管（F5），发光颜色为翠绿色（峰值波长 520nm）。该器件采用绿色透镜设计，短脚标识阴极，适用于面板指示、仪表显示、信号提示等通用照明与指示场合。
二、主要特性
- 发光颜色：翠绿色（520nm 峰值波长，范围 520–530nm）
- 发光强度：12000 mcd（典型值）
- 正向电流：20 mA（额定工作电流）
- 功率耗散：70 mW（最大）
- 正向压降（Vf）：约 3.0 V（在额定电流下）
- 工作温度范围：-25℃ 至 +85℃
- 封装形式：插件（直插），D=5mm，绿色透镜，短脚为阴极标识
三、电学与光学参数要点
XL-502UGD 在标准工作点（IF=20mA）下可提供高亮度输出与稳定的色品位置。正向压降约为 3V，额定功率耗散约 70mW，设计与选型时应确保电流限制与散热设计满足该功率条件，以保证长期可靠性。翠绿色波段（520–530nm）具有视觉鲜明、对比度高的特点，利于指示识别。
四、封装与外观说明
本器件为圆头透镜结构，直径 5mm（F5），绿色透明/半透明透镜有利于色彩一致性与发光均匀性。采用插件（Through-hole）引脚形式，便于手工焊接或波峰焊装配。短脚为阴极（Cathode），装配时可据此判断极性，避免反装造成损坏。
五、典型应用场景
- 仪表、面板、控制台指示灯
- 家电状态显示、按键背光、信号提示
- 工业设备与通讯设备的状态指示
- 原型开发与电子教学演示
六、安装与使用建议
- 推荐工作电流以不超过 20mA 为宜，并采用限流电阻或恒流驱动；
- 焊接温度与时长应遵循常规 LED 插件焊接工艺，避免长时间高温直焊；
- 使用时注意正负极性，短脚为阴极；反向电压和反向电流应控制在器件允许范围内以避免击穿；
- 若在高温环境或高密度封装中使用，应考虑散热与环境温升对光衰的影响。
七、可靠性与存储
工作温度范围为 -25℃ 至 +85℃，在此范围内可保持正常发光性能。长期存储时请保持干燥、避光并防止受潮，建议在制造商推荐的包装条件下保存并在合理期限内使用，以保证出厂一致性与寿命表现。
总结：XL-502UGD 为一款亮度高、色彩稳定、封装通用的 5mm 翠绿色直插 LED，适合各类指示与显示用途。选型时请结合实际工作电流、驱动方式与热管理措施，以发挥器件最佳性能。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
