Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-1608BGWC-06 LED XL-1608BGWC-06
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-1608BGWC-06
- Type
- XINGLIGHT
- Minimum package
- 4000 圆盘
Technical parameters
- Power
- 70mW
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-1608BGWC-06
- Electronic Component
- 1
- Package
- 603
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.021g
- Electronic Component
- 1
- LED
- 960mcd
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0225276542
- Operating Temperature
- 40℃~+85℃
- Current
- 20mA
- Type
- 1.6mmx0.8mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-1608BGWC-06 0603 冰蓝贴片发光二极管 — 产品概述
一、产品简介
XL-1608BGWC-06 为 Xinglight（成兴光）出品的 0603（1608公制）表面贴装发光二极管，发光颜色为冰蓝色。器件为独立二极管结构，适用于高密度贴片电路板的指示与背光应用，外观小巧、亮度稳定，便于自动贴装与回流焊工艺。
二、主要电气与光学参数
- 正向电流（If）：20 mA（最大额定值）
- 正向压降（Vf）：典型 3.3 V
- 功率耗散：70 mW（额定），按典型值计算 3.3 V × 20 mA ≈ 66 mW，接近额定值，应避免长期满载运行以保证寿命
- 发光强度：960 mcd（在额定电流下）
- 发光角度：120°，提供较宽的可视范围
- 工作温度范围：-40 ℃ 至 +85 ℃
- 封装方式：0603 正贴（SMD），独立二极管排列
三、封装与机械特性
0603（1608）尺寸使该器件非常适合空间受限或需高密度布板的产品。采用标准 SMD 外形，兼容常见的自动贴装机与回流焊流程。由于器件尺寸较小，焊盘设计与回流参数需遵循厂商建议，以确保良好焊接与散热性能。
四、使用建议与典型电路
- 驱动方式：建议通过限流电阻或恒流驱动器控制电流，避免直接并联电源驱动。限流电阻计算公式：R = (VCC − Vf) / If。
例如：VCC = 5 V，If = 20 mA，则 R ≈ (5 − 3.3) / 0.02 ≈ 85 Ω（可选用 82 Ω 或 91 Ω 标准值）。 - 散热与功率：在靠近额定功率工作时，应注意PCB散热设计，避免温度升高影响光效与寿命。
- 焊接与存储：请按厂商数据手册中的回流焊曲线与防潮等级（MSL）要求处理，必要时回流前进行烘干处理以防元件吸湿爆裂。
- 防静电：器件对静电敏感，建议在装配、搬运过程中采取防静电措施。
五、可靠性与典型应用
- 可靠性：额定工作温度范围宽（-40 ℃ 至 +85 ℃），适应工业级环境与室外短期暴露场景。长期可靠性依赖于驱动条件与焊接质量。
- 应用场景：电子指示灯、仪表面板、家电指示、可穿戴设备、通信设备指示、微型背光与信号提示等需要小尺寸、高亮度冰蓝色显示的场合。
六、选型注意事项
在工程选型阶段，建议参考成兴光提供的完整数据手册以获取光谱分布、IV 曲线、光色坐标（CIE）、波长峰值、封装尺寸公差、回流焊详表和可靠性试验报告等详细参数。若要求严格的色容差或多批次一致性，应与供应商确认分选（binning）信息与送样测试。
总之，XL-1608BGWC-06 以其小尺寸、较高亮度与较宽视角，适合用于对体积与视觉效果有较高要求的指示与背光应用；合理的电路驱动与焊接工艺可保障其长期稳定工作。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
