Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-3030UWC-1W-3V LED XL-3030UWC-1W-3V
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-3030UWC-1W-3V
- Type
- XINGLIGHT
- Minimum package
- 5000 圆盘
Technical parameters
- Power
- 1W
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-3030UWC-1W-3V
- Electronic Component
- 1
- Package
- SMD3030-2P
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 6500K~7000K
- Electronic Component
- 0.035g
- Electronic Component
- 1
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0226466261
- Operating Temperature
- 40℃~+85℃
- Current
- 300mA
- Type
- 3.0mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-3030UWC-1W-3V 产品概述
XL-3030UWC-1W-3V 是成兴光（Xinglight）推出的一款高可靠性贴片白光发光二极管，采用 SMD3030 封装，单颗功率 1W，面向中高亮度照明与指示类应用。产品以稳定的电气特性和宽视角配合黄色透镜的配光设计，适用于阵列光源、背光、室内/室外通用光源模组等场景。
一、主要特性
- 光色：白色（冷白）
- 色温：6500K ~ 7000K（偏冷白）
- 正向电流：350 mA（额定驱动电流）
- 正向压降（Vf）：3.4 V（典型，随温度与电流略有变化）
- 功率：1 W（典型）
- 发光角度：120°（宽视角）
- 工作温度范围：-40 ℃ ~ +85 ℃
- 封装：SMD3030，载带方式：正贴（Tape & Reel）
- 透镜颜色：黄色透镜（有利于荧光粉转换与配光一致性）
- 品牌：Xinglight（成兴光）
二、光学与配光说明
黄色透镜通常与荧光粉体系配合使用，可实现较好的色温控制与光色均匀性。120°的大视角使光斑过渡平滑、照明无明显暗区，适合面光源或需要柔和配光的场合。色温 6500K~7000K 属于冷白光，适合工作照明、商用照明及某些工业照明应用。
三、电气与热管理要点
- 建议采用恒流驱动方式以确保亮度与寿命稳定；在驱动设计中考虑 Vf 随温度上升而下降的特性。
- 尽量保证良好的散热路径：在 PCB 下方设计适当的金属散热铜箔或热沉连接，控制结温以延长寿命。
- 额定工作条件下功耗约 1 W，散热不良会导致光衰加速与色温漂移。
四、封装与焊接建议
- 封装为 SMD3030，采用正贴载带供料，便于自动贴装。
- 推荐遵循通用 SMT 回流焊工艺曲线，注意峰值温度与回流时间不要超过元件耐受范围（建议参考制造商提供的回流焊温度曲线）。
- 焊盘设计时为保证热流通畅，应预留适当的金属化热沉面积并使用热通孔（via）连接至背层散热铜箔。
五、典型应用场景
- 室内/商用照明模组（面板灯、筒灯）
- 指示与信号光源、显示背光单元
- 工业设备照明、便携式照明产品
- LED 阵列与光学模组应用
六、使用与存储注意事项
- 避免长时间在高温高湿环境下存放，建议密封防潮包装并在规定期限内回流焊接。
- 生产与装配过程中应做好防静电（ESD）保护与防潮处理。
- 在使用中避免超过额定电流与环境温度上限，以防光通量快速衰减或器件失效。
七、质量与可靠性提示
成兴光产品经过常规的光电性能分选与出厂测试，但具体光通量、色容差与 Vf 会有分档（bin）差异。量产前建议索取样品并结合实际驱动与散热方案做可靠性验证与寿命评估。
如需更详细的电学曲线、光学曲线、回流焊温度曲线或样品报价，请提供用量与应用环境，我可以帮助进一步匹配驱动方案与热设计建议。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
