Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-0201SURC LED XL-0201SURC
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-0201SURC
- Type
- XINGLIGHT
- Minimum package
- 5000 圆盘
Technical parameters
- Power
- 50mW
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-0201SURC
- Electronic Component
- 1
- Package
- 201
- Electronic Component
- 615nm~630nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.014g
- Electronic Component
- 1
- LED
- 240mcd
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0225275633
- Electronic Component
- 625nm
- Operating Temperature
- 40℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-0201SURC（0201）产品概述
一、产品简介
XL-0201SURC 是成兴光（Xinglight）推出的一款超小型贴片发光二极管（SMD LED），封装尺寸为 0201（约 0.6 × 0.3 mm），发红光，适用于微型指示、背光和高密度布板场合。器件针对体积受限、对亮度与能耗有平衡需求的便携与消费类电子设备进行优化。
二、主要电气与光学参数
- 正向电流（If）：20 mA（建议典型驱动电流）
- 峰值波长（λp）：625 nm，光谱范围 615–630 nm（红色）
- 正向压降（Vf）：2.4 V（典型值）
- 发光强度：240 mcd（在标称驱动条件下）
- 发光角度：120°（宽视角，扩散型指示效果良好）
- 功率：50 mW（最大耗散功率）
- 工作温度范围：-40 ℃ 至 +85 ℃
三、产品特点与优势
- 超小封装：0201 尺寸，便于高密度贴片与紧凑系统设计。
- 颜色稳定：峰值 625 nm，色温/色调一致性好，适合对色彩要求较高场合。
- 宽视角：120° 视角提供均匀可见性，减少指示盲区。
- 低功耗高亮度：在低电流下即可获得可视亮度，延长电池设备续航。
- 宽工作温度：满足多种环境下长期稳定工作需求。
四、典型应用场景
- 可穿戴设备与医疗仪器的状态指示灯
- 手机、耳机与小型消费电子的面板/按键背光
- 仪表、遥控器与小型家电的微型指示与信号显示
- 高密度 PCB 的微型指示阵列与图形化显示
五、封装与安装建议
- 贴片方式：正贴（SMD），支持自动贴片与回流焊工艺。
- 推荐 PCB 设计应考虑最小化热阻与焊盘尺寸以便可靠焊接与测试；0201 尺寸对贴装精度要求高，建议采用高精度贴片机与防止偏移的焊膏模板。
- 建议在设计时预留足够的测试点与熔接可靠性冗余，以便量产检测与维修。
六、可靠性与操作规范（要点）
- 防静电：器件对静电敏感，生产与搬运过程中应采取 ESD 防护措施（佩戴接地手环、使用防静电包装）。
- 回流焊：遵循厂商推荐的回流曲线与峰值温度（避免过冲和长时间高温），以免影响封装与光学性能。
- 存储：建议干燥、低湿环境保存，避免长时间暴露在潮湿或高温环境中；开盘后按贴片元件的湿度敏感等级（MSL）处理。
七、选型提示与采购信息
在实际选型时，关注驱动电流与实际发光强度的对应关系，若需更高亮度可采用并联/串联阵列或改变驱动策略；若对工作温度、寿命或色容差有更严格要求，建议与厂商确认配方和测试报告。XL-0201SURC 常见包装为卷带（Tape & Reel），适合表面贴装大批量生产。
总结：XL-0201SURC 以其超小体积、稳定的红光输出与宽视角，适合对体积和能耗有严格要求的现代电子产品，为微型指示与高密度应用提供可靠的发光解决方案。若需完整数据手册、回流曲线或精确封装尺寸，请联系成兴光获取技术资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
