Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-3215UGC LED XL-3215UGC
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-3215UGC
- Type
- XINGLIGHT
- Minimum package
- 3000 圆盘
Technical parameters
- Power
- 70mW
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-3215UGC
- Electronic Component
- 1
- Package
- SMD,3.2x1.3mm
- Electronic Component
- 515nm~530nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.03g
- Electronic Component
- 1
- LED
- 1.15cd
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0259340541
- Electronic Component
- 525nm
- Operating Temperature
- 40℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-3215UGC 贴片翠绿发光二极管产品概述
一、产品基本定位
XL-3215UGC是Xinglight（成兴光）推出的一款小尺寸贴片发光二极管（LED），核心发光颜色为翠绿色，适配1205规格的表面贴装工艺。该器件主打紧凑尺寸、高亮度指示，兼具宽工作温度范围与自动化贴装兼容性，适合各类需要小型化状态指示或辅助照明的电子设备设计。
二、核心光电性能参数解析
该型号LED的关键性能参数明确，是电路设计与应用选型的核心依据：
- 发光特性：
发光颜色为翠绿色，峰值波长525nm，光谱覆盖515nm~530nm——此波段处于人眼对绿色光敏感度较高的区间，显色清晰且辨识度强；发光强度达1150mcd（毫坎德拉），配合120°宽发光角度，可满足广视角指示或小型均匀背光需求。 - 电气参数：
正向压降（Vf）为3.3V，额定正向电流（If）20mA，额定功率70mW（由Vf×If计算得约66mW，与标称值一致，符合器件功率设计）；实际使用中需通过串联限流电阻控制电流，避免过流导致光衰或损坏。
三、封装与载带特性
虽然具体封装型号未明确，但XL-3215UGC属于1205小尺寸贴片规格（尺寸约1.2mm×0.5mm），载带方式为反贴——这一设计适配常规SMT（表面贴装技术）生产线，可实现自动化高速贴装，降低人工成本，适合批量生产场景。
四、环境适应性与可靠性
该器件的工作温度范围为**-40℃~+85℃**，覆盖了多数电子设备的使用环境：
- 低温端可适应户外低温场景（如北方冬季户外设备）；
- 高温端能满足部分工业设备内部（如PLC、传感器）的散热有限环境；
宽温范围下仍能保持稳定发光，可靠性较高。
五、典型应用场景
结合尺寸、亮度与宽温特性，XL-3215UGC适用于以下场景：
- 消费电子：手机、平板、智能音箱的状态指示灯（充电、通知、连接状态）；
- 智能穿戴：手环、手表的辅助功能指示（心率监测、电量）；
- 工业控制：PLC、传感器、变频器的状态指示（运行、故障、通讯）；
- 小型照明：小型显示屏背光、玩具/礼品的装饰照明；
- 家电产品：洗衣机、空调、冰箱的功能指示灯（启动、模式切换）。
六、使用注意事项
- 限流保护：必须串联限流电阻，确保正向电流不超过20mA（建议按18~20mA设计，留有余量）；
- 静电防护：LED为静电敏感器件，生产、组装过程需佩戴防静电手环，使用防静电工具与工作台；
- 极性识别：贴片LED存在正负极（通常标记点或长焊盘为正极），反接无法发光且可能损坏器件；
- 温度控制：长期在接近85℃环境下使用会加速光衰，需保证设备散热良好。
XL-3215UGC凭借紧凑尺寸、高亮度与宽温特性，成为小型电子设备状态指示的高性价比选择，可满足多数消费电子、工业控制与家电场景的需求。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
