Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-A524SURUGW
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-A524SURUGW
- Type
- XINGLIGHT
- Minimum package
- 1000 袋装
Technical parameters
- Power
- 50mW；70mW
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-A524SURUGW
- Electronic Component
- 1
- Package
- Through-hole, D=5mm
- Electronic Component
- 520nm~530nm；635nm~640nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.322g
- Electronic Component
- 1
- LED
- 800mcd；4cd
- LED
- 30°
- LED
- Electronic Component
- Electronic Component
- BM0259344481
- Electronic Component
- 520nm；640nm
- Operating Temperature
- 20℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-A524SURUGW 直插发光二极管产品概述
一、产品基本信息
XL-A524SURUGW是Xinglight（成兴光）推出的5mm圆形直插发光二极管，采用共阴极双色设计，集成红色与翠绿色发光单元，外观为雾状封装（兼顾出光均匀性与视觉舒适度）。产品采用标准插件封装（灯头直径D=5mm），兼容传统PCB焊接工艺，是电子设备指示、小型显示等场景的高性价比选择。
二、核心性能参数
产品针对红、绿两种发光颜色分别优化，核心参数清晰可查，具体如下：
性能参数 红色发光单元 翠绿色发光单元 正向压降（Vf） 典型值2.3V 典型值3.4V 额定功率 50mW 70mW 额定正向电流 20mA 20mA 波长范围 635nm~640nm 520nm~530nm 峰值波长 640nm 520nm 发光强度 ≥800mcd ≥4000mcd 发光角度 30° 30° 工作温度范围 -20℃~+85℃ -20℃~+85℃ 二极管配置 共阴极（与绿色共用） 共阴极（与红色共用）注：红绿组合发光时需注意总功率不超过封装散热极限，建议单路驱动不超过20mA。
三、产品设计特点
双色共阴灵活控制
红、绿发光单元共用阴极引脚，阳极独立控制，可实现「单红点亮」「单绿点亮」或「红绿同时点亮」（组合为橙黄色），无需额外切换电路，简化PCB布局与BOM成本。雾状封装提升体验
灯头采用雾状工艺，避免直接眩光，同时提升出光均匀性，使发光区域无明显暗斑，视觉效果更柔和，适合近距离观察场景（如仪器面板指示）。高发光强度满足需求
翠绿色发光强度达4000mcd，红色达800mcd，即使在明亮环境下（如白天室内）也能清晰识别，无需额外增加透镜或聚光结构。宽温域稳定可靠
工作温度覆盖-20℃至+85℃，可适应户外低温环境（如北方冬季）或工业设备的高温工作场景（如控制柜内部），长期使用性能稳定。标准封装兼容通用
5mm圆形直插封装符合行业通用标准，焊接工艺成熟，可与常规插件焊盘匹配，无需特殊设计即可集成到各类电子设备中。
四、典型应用场景
XL-A524SURUGW凭借双色共阴、高亮度、宽温域等特点，广泛应用于以下场景：
电子设备状态指示
- 家电：电视、空调、洗衣机的电源/待机指示（绿=正常，红=待机/故障）；
- 仪器仪表：万用表、示波器的信号输入/输出状态反馈，帮助用户快速判断设备工作状态；
- 工业控制：PLC、传感器、继电器的运行/故障指示，提升设备运维效率。
小型显示与装饰
- 玩具与工艺品：儿童玩具的车灯、工艺品的发光装饰（红绿切换营造动态效果）；
- 小型电子模块：简易字符显示（如数码管辅助指示）、电子时钟的时间/模式指示。
低亮度辅助照明
- 夜间指示灯：如楼道应急灯的辅助指示、车载仪表盘的低亮度提示灯；
- 设备背光：小型电子设备的按键背光（红绿组合实现不同功能提示）。
五、可靠性与封装说明
- 封装可靠性：插件封装采用耐高温塑料，焊接时无变形风险，引脚经抗氧化处理，长期使用不易接触不良；
- 驱动兼容性：额定正向电流20mA，可通过1/4W电阻（如R=（Vcc-Vf）/20mA）实现简单限流，无需复杂驱动电路；
- 一致性保障：Xinglight采用标准化生产工艺，产品波长、发光强度一致性好，批量应用时无需额外筛选。
XL-A524SURUGW兼顾性能与成本，是各类需要双色指示场景的实用选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
