Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-3216HIRC-850
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-3216HIRC-850
- Type
- XINGLIGHT
- Minimum package
- 3000 编带
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-3216HIRC-850
- Electronic Component
- 1
- Package
- 1206
- Electronic Component
- 850nm~858nm
- Electronic Component
- Infrared Emitter
- Electronic Component
- 120°
- Electronic Component
- 0.029g
- Electronic Component
- 1
- Electronic Component
- BM0259344219
- Operating Temperature
- 40℃~+85℃
- Current
- 30mA
- Electronic Component
- 2mW/sr
- (Vf)
- 1.4V~1.6V
- Power Dissipation(Pd)
- 55mW
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-3216HIRC-850 产品概述
一、产品简介
XL-3216HIRC-850 是成兴光（Xinglight）推出的一款 1206 封装贴片红外发射二极管，峰值波长约 850nm（850–858nm），为近红外照明与发射应用提供稳定、体积小、封装兼容表贴工艺的光源选择。适用于摄像头补光、近红外通信、感测与检测等场景。
二、主要参数
- 封装：1206（约 3.2×1.6 mm）
- 波长（峰值）：850–858 nm
- 正向压降（Vf）：1.4–1.6 V
- 额定正向电流：30 mA
- 功率耗散（Pd）：55 mW（典型 Vf×If ≈ 1.5 V × 30 mA ≈ 45 mW，低于耗散限制）
- 辐射强度：2 mW/sr
- 视角：120°（宽视角，利于均匀照明）
- 反向耐压（Vr）：直流 5 V
- 工作温度：-40 ℃ ~ +85 ℃
三、产品特性
- 小型表贴封装，适合高密度 PCB 布局与自动化贴装。
- 850nm 波段兼容普通 CMOS/CCD 夜视与近红外感测器，穿透性与灵敏度良好。
- 宽视角（120°）便于实现较大范围的均匀照明，减少盲区与热点。
- 低正向压降与中等辐射强度，适合常规恒流驱动或模块化阵列设计。
四、典型应用
- 红外补光模组（监控摄像头、安防夜视）
- 主动近红外照明（工业视觉、机器视觉）
- 距离/存在检测与光电传感器发射端
- 近红外通信与遥控（短距离脉冲）
- 人体/物体识别配套光源
五、驱动与热管理建议
- 建议恒流驱动，单灯工作时按额定 If=30 mA 设计限流；若采用阵列驱动，请保证单元平均电流与总功耗在封装与 PCB 散热能力内。
- 注意反向电压限制，避免超过 5 V。
- Vf×If 产生的热量需通过良好 PCB 铜箔和散热设计导出，确保结温与环境温度在规定范围内以延长寿命。
六、封装与装配注意事项
- 兼容常见回流焊工艺，但请参照厂家数据手册确认具体焊接曲线与峰值温度。
- SMT 贴装与回流后，避免长期高湿环境保存；建议干燥包装并按厂方建议的潮湿敏感等级（MSL）处理。
- 操作与调试时注意 ESD 防护，避免静电损伤。
七、可靠性与安全提示
- 红外光不可见但对眼睛有潜在伤害，设计时应评估人眼安全（例如 IEC/EN 光生物安全标准）并采取合适的限流、遮光或功率控制策略。
- 建议在产品开发阶段进行温度循环、寿命加速与热冲击等可靠性验证。
八、采购与替换建议
- 型号：XL-3216HIRC-850，品牌：Xinglight（成兴光）。
- 在更换或等效选择时注意波长、辐射强度、视角、封装尺寸与最大正向电流等关键参数一致，以保证系统性能。
如需完整电气特性曲线、焊接曲线或原厂认证报告，请索取成兴光官方数据手册以获得详细规范与推荐使用条件。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
