Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-2012UBC-A
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-2012UBC-A
- Type
- XINGLIGHT
- Minimum package
- 3000 圆盘
Technical parameters
- Power
- 100mW
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-2012UBC-A
- Electronic Component
- 1
- Package
- 805
- Electronic Component
- 456nm~476nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.023g
- Electronic Component
- 1
- LED
- 300mcd
- LED
- 130°
- LED
- Electronic Component
- Electronic Component
- BM0230032124
- Electronic Component
- 465nm
- Operating Temperature
- 40℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-2012UBC-A 0805 贴片蓝光LED 产品概述
一、产品简介
XL-2012UBC-A为Xinglight（成兴光）推出的0805封装贴片发光二极管，发光颜色为蓝色（峰值波长465nm，波长范围456–476nm）。该器件采用无色透明透镜、正贴载带方式，面向对体积、功耗和视角有要求的消费电子与指示灯应用。
二、主要参数
- 发光颜色：蓝色
- 峰值波长：465nm（范围456–476nm）
- 正向电压（Vf）：2.6V ~ 2.9V
- 正向电流（If）：5mA（推荐工作电流）
- 功率额定：100mW（器件最大耗散）
- 发光强度：300mcd（典型，If=5mA）
- 发光角度：130°
- 透镜颜色：无色透明
- 封装：0805（SMD）
- 工作温度：-40℃ ~ +85℃
- 型号：XL-2012UBC-A，品牌：Xinglight（成兴光）
三、特性与优势
- 小型封装（0805），适合高密度贴装与微型化设计。
- 宽视角（130°），适用于指示与非方向性照明，光分布均匀。
- 中等亮度（≈300mcd），在低电流下能获得良好可视性且功耗低。
- 工作温度范围宽，适应工业级环境。
四、使用与驱动建议
- 推荐工作点：If = 5mA，可获得标称亮度并保持长期可靠性。
- 简单限流电阻计算（以5V电源为例）：
R = (Vsup - Vf) / If。取Vf最大值2.9V，If=5mA，R = (5 - 2.9) / 0.005 = 420Ω，常用取值430Ω或470Ω。 - 器件耗散：P_LED ≈ Vf × If ≈ 2.9V × 5mA = 14.5mW，远小于100mW额定，仍需关注PCB散热及串并联设计。
五、安装与工艺注意
- 采用常规回流焊贴装，建议遵循厂家回流焊曲线与行业规范，避免超过器件允许的最高温度峰值。
- 芯片类LED易受静电损伤，生产与维修时应采取ESD保护（接地腕带、离子风机等）。
- 清洗时避免长时间浸泡高温化学清洗液，必要时参考厂家化学兼容性建议。
- 储存建议防潮包装（干燥剂与封盘），若长期暴露于高湿环境，按厂家要求进行烘烤处理再回流焊接。
六、可靠性与环境适应
- 可在-40℃至+85℃环境下稳定工作，适用于多数消费及工业场景。
- 因0805体积小，散热路径有限，建议在高环境温或高密度布局时适当降低工作电流或增加散热措施。
七、典型应用
- 面板指示灯、状态指示、功能键背光
- 可穿戴设备、移动终端、遥控器指示
- 家用电器、工控仪表、小型照明模块
八、包装与订购
- 封装规格：0805，正贴载带，适配自动贴片机。
- 可按批量提供卷带包装（Tape & Reel），下单时请注明型号XL-2012UBC-A及所需数量与包装方式，或联系供应商获取产测与回流工艺资料。
如需更详细的绝对最大额定值、IV曲线、光谱曲线与回流焊曲线资料，可提供样品或联系厂商技术支持获取完整数据手册。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
