WMSIC Electronic Components

Xinglight XL-3535UV1SB12P3

ModelXL-3535UV1SB12P3
PackageSMD3535-3P
BrandXINGLIGHT
Price Price on request Electronic component prices change quickly with market supply and demand. Please refer to the latest WMSIC quotation for current pricing.
Configuration
1 options
Configuration 26+

Available for RFQ

Technical data

Product details

19 specifications

Core information

Product name
Xinglight XL-3535UV1SB12P3
Type
XINGLIGHT
Minimum package
1000 卷

Technical parameters

Electronic Component
Electronic Component
Electronic Component
XINGLIGHT
Electronic Component
XL-3535UV1SB12P3
Electronic Component
1
Package
SMD3535-3P
Electronic Component
Ultraviolet LED (UV LED)
Electronic Component
0.123g
Electronic Component
15nm
Electronic Component
1
LED
120°
Electronic Component
BM0259344608
Electronic Component
260nm~280nm
Operating Temperature
40℃~+135℃
Current
100mA
Power
15mW
Electronic Component
3kV

For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.

XL-3535UV1SB12P3 3535封装UVC单波紫外杀菌灯产品概述

一、产品定位与核心价值

XL-3535UV1SB12P3是Xinglight(成兴光)针对紧凑空间消毒需求推出的3535贴片式UVC单波紫外灯,以7-15mW辐射功率实现高效杀菌,同时兼顾宽温适应性、抗静电能力与小尺寸集成性,解决传统汞灯体积大、寿命短、污染风险高的痛点,是手持消毒设备、小型消毒装置的高性价比核心组件。

二、关键性能参数及杀菌适配性

1. 杀菌黄金波段精准匹配

峰值波长260-280nm,完全覆盖细菌、病毒DNA/RNA的最高吸收峰(260nm左右),同等辐射量下杀菌效率比280nm以上波长提升约30%,可快速灭活大肠杆菌、金黄色葡萄球菌、流感病毒等常见微生物(如10cm距离内,30秒可灭活表面99%以上细菌)。

2. 功率与供电适配性

  • 正向电流100mA、耗散功率500mW,辐射功率达15mW,满足小型场景杀菌需求(如手机消毒器、冰箱消毒盒);
  • 正向压降6V,适配常见5V供电系统(仅需简单升压电路即可驱动),降低电源设计成本。

3. 宽温与抗干扰能力

  • 工作温度范围-40℃~+135℃,可稳定运行于户外低温(如冷库消毒)、工业高温(如高温车间局部消毒)环境;
  • 抗静电能力3kV(人体模型),生产组装过程无需额外复杂静电防护,提升效率。

4. 光学性能优化

  • 发光角度120°,广角度覆盖小空间(如10cm³以内),避免照射死角;
  • 半波宽15nm,单色性优异,减少无效波长输出,进一步提升杀菌效率与能量利用率。

三、结构设计与可靠性优势

采用3535标准贴片封装(3.5mm×3.5mm×1.2mm),体积紧凑,适合高密度贴装(如手持消毒棒可集成3-5颗);封装材料选用耐高温陶瓷基底,配合优化散热通道,可有效导出500mW耗散功率产生的热量,延缓光衰;反向电流仅5uA,反向漏电小,长期使用可靠性高(典型寿命可达5000小时以上,合理散热可延长至8000小时)。

四、典型应用场景

1. 手持消毒设备

适配手持消毒棒、手机消毒器,小尺寸封装可嵌入握把,120°发光角度覆盖手机表面、门把手等小面积区域。

2. 家居小型消毒

用于鞋柜、衣柜、冰箱消毒盒,宽温范围适配冰箱低温(-18℃)、衣柜常温环境,15mW辐射功率满足日常消毒需求(如鞋柜消毒10分钟可灭活鞋内真菌)。

3. 医疗辅助消毒

小型口腔护理设备(冲牙器)内部消毒、体温计表面消毒,3kV抗静电能力适合医疗电子组装环节,避免静电损坏。

4. 工业局部消毒

小型仪器表面消毒、包装线产品局部消毒,紧凑封装可集成于设备内部,不占用额外空间。

五、使用注意事项

  1. 散热要求:需贴装于铝基板或带散热片的PCB上,连续工作不超过1小时,避免温度超过135℃导致光衰;
  2. 防护要求:UVC对人体眼睛、皮肤有伤害,设备需加装石英玻璃防护罩(透光率>80%),禁止直接照射人体;
  3. 供电要求:采用稳压电源,电压波动不超过±0.5V,防止过流损坏。

该产品凭借小尺寸、宽温、高效杀菌等优势,已广泛应用于消费电子、医疗、家居消毒领域,是替代传统汞灯的理想选择。

Request for quote

Send RFQ

Use the form for single models, category sourcing, and multi-line BOM requirements.

Send your target model and quantity.

Product sourcing intelligence

Model, package, availability, and BOM fit reviewed before quotation.

WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.

Electronic component model and package intelligence review on an ESD-safe inspection bench

Model & package intelligence

Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.

BOM matching and alternative component comparison workstation with protected IC samples

BOM matching & alternatives

BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.

Electronic component sourcing availability dashboard with ESD-protected samples

Sourcing availability signal

Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.

Buyer sourcing scenarios

Examples of how common component sourcing requests are organized.

Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.

The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.

Package confirmation Typical RFQ workflow

A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.

Mixed BOM triage Typical RFQ workflow

The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.

Obsolete-part review Typical RFQ workflow

Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.

Small-batch request Typical RFQ workflow

Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.

Repair batch evidence Typical RFQ workflow

When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.

Model suffix clarification Typical RFQ workflow

Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.

Export handoff Typical RFQ workflow

The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.

Replenishment inquiry Typical RFQ workflow

Related products

Packaged components ready for RFQ.