Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-3535UV2SB12P2
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-3535UV2SB12P2
- Type
- XINGLIGHT
- Minimum package
- 1000 卷
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-3535UV2SB12P2
- Electronic Component
- 1
- Package
- SMD3535-5P
- Electronic Component
- Ultraviolet LED (UV LED)
- Electronic Component
- 0.092g
- Electronic Component
- 1
- Electronic Component
- BM0259344611
- Electronic Component
- 260nm~280nm@UVC；390nm~410nm@UVA
- Operating Temperature
- 40℃~+135℃
- Current
- 60mA@UVA；40mA@UVC
- Power
- 40mW@UVA；8mW@UVC
- (Vf)
- 3.4V@UVA；6.4V@UVC
- Power Dissipation(Pd)
- 200mW
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-3535UV2SB12P2（3535封装UVC+UVA双波紫外灯）产品概述
一、产品定位与核心价值
XL-3535UV2SB12P2是成兴光（Xinglight）针对双波段紫外消毒/辅助需求设计的3535封装SMD紫外灯，集成UVC（杀菌主波段）与UVA（辅助功能段）双光源，单器件实现“杀菌+多场景适配”，可有效简化终端设备结构、降低成本，适用于医疗、家用、小型工业等多领域消毒应用。
二、双波段关键性能参数
产品针对UVC杀菌与UVA辅助功能分别优化，核心性能如下：
波段 峰值波长范围 额定正向电流（If） 典型正向压降（Vf） 辐射功率范围 UVC 260nm~280nm 40mA 6.4V 5~8mW UVA 390nm~410nm 60mA 3.4V 40mW注：总耗散功率（Pd）≤200mW，需匹配对应电流驱动以保障性能与寿命。
三、电气与环境适配参数
- 驱动要求：需采用恒流驱动，UVC段额定电流40mA（峰值电流需参考品牌datasheet限制），UVA段60mA；正向压降随电流/温度略有变化，驱动电路需预留补偿空间；
- 工作温度范围：-40℃~+135℃，宽温设计可适应低温冷链、高温车间等极端场景；
- 存储条件：建议-55℃~+150℃（湿度≤85%RH，非凝结），避免长期暴露于高湿/腐蚀性环境。
四、典型应用场景
结合双波特性，产品可覆盖以下场景：
- 小型消毒设备：便携式手机/口罩消毒盒（UVC杀细菌病毒，UVA辅助检测/催化）、小型牙刷消毒器；
- 医疗辅助消毒：医用小型器械表面消毒（如听诊器、体温计）、输液管局部消毒模块；
- 家用/商用空间：空气净化器内置消毒模块（UVC杀病菌+UVA辅助净化异味）、小型橱柜消毒灯；
- 工业轻应用：化妆品/食品包装表面消毒（小批量定制线）、小型水处理模块（如饮水机滤芯消毒）。
五、封装与可靠性说明
- 封装形式：3535标准SMD封装（3.5mm×3.5mm×1.0mm），表面贴装兼容自动化生产，焊接温度需符合SMD行业标准（回流焊峰值温度≤260℃）；
- 可靠性：通过品牌2000小时以上老化测试，宽温工作范围验证了环境适应性；成兴光作为专业紫外光源厂商，产品一致性符合工业级要求；
- 散热注意：总功耗200mW，需确保PCB设计合理散热（如适当增加焊盘面积、采用散热铜箔），避免局部过热缩短寿命。
六、选型与应用建议
- 驱动匹配：需采用双路恒流驱动（分别对应UVC、UVA），避免单路驱动导致电流分配不均；
- 杀菌效率验证：若应用场景对杀菌效率要求高，需结合UVC辐射功率（5~8mW）计算有效照射距离/时间；
- 环境适配：极端高温场景（如+135℃）需额外增加散热片，低温场景需确认驱动电路的低温稳定性。
成兴光XL-3535UV2SB12P2凭借双波集成、宽温适配、小体积等优势，为紧凑式消毒设备提供了高效解决方案，可满足多领域对紫外消毒的差异化需求。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
