Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-A524SURUBW
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-A524SURUBW
- Type
- XINGLIGHT
- Minimum package
- 1000 袋
Technical parameters
- Power
- 50mW；70mW
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-A524SURUBW
- Electronic Component
- 1
- Package
- Through-hole, D=5mm
- Electronic Component
- 460nm~470nm；635nm~640nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.315g
- Electronic Component
- 1
- LED
- 800mcd；700mcd
- LED
- 35°
- LED
- Electronic Component
- Electronic Component
- BM0259344528
- Electronic Component
- 638nm；465nm
- Operating Temperature
- 20℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-A524SURUBW 直插双色发光二极管产品概述
一、产品基本定位与应用场景
这款由成兴光（Xinglight）推出的XL-A524SURUBW，是一款5mm直插式红蓝双色共阴极LED，核心用于需要双状态指示的电子场景——比如家电的“运行/待机”“正常/故障”，小型仪器的“信号有效/无效”，玩具的“功能开启/关闭”等。雾状封装设计让发光更均匀柔和，避免眩光，适合近距离视觉观察，是工业控制、消费电子、DIY制作的高性价比选择。
二、核心参数与性能亮点
1. 光学特性：颜色纯正，亮度适配
- 颜色与波长：红色峰值波长638nm（范围635640nm），属于高亮度红光区间；蓝色峰值465nm（范围460470nm），无偏色。
- 亮度与视角：红色发光强度800mcd，蓝色700mcd，满足日常指示需求（无需额外放大）；35°发光角度兼顾视野范围与亮度集中度，面板安装后视觉效果清晰。
- 封装设计：5mm圆形雾状封装，散射型结构让发光均匀，避免单点刺眼，提升用户体验。
2. 电学特性：驱动简单，稳定性强
- 配置与电流：共阴极设计（红、蓝芯阴极共用，阳极独立），电路接线简洁；正向电流20mA（LED行业通用标准），长期工作无过热风险。
- 压降与功率：红色正向压降2.3V，功率50mW；蓝色3.4V，功率70mW。搭配5V电源时，只需串联简单限流电阻即可稳定工作（比如红色需130150Ω，蓝色80100Ω），无需复杂驱动电路。
3. 环境适应性：宽温范围，抗干扰
工作温度覆盖**-20℃~+85℃**，能适应大部分室内外场景（比如冬季室内家电、夏季户外小型仪器）；抗静电能力符合工业级要求，批量应用时失效风险低。
三、封装可靠性与应用适配性
- 直插封装优势：引脚牢固，兼容手工焊接（适合DIY）与自动插件（适合工业生产），生产效率高。
- 品牌保障：成兴光作为专业LED厂商，产品经过老化测试，长期工作（1000小时以上）光衰小于10%，可靠性稳定。
- 多场景适配：除状态指示外，还可用于小型显示面板的像素单元（双色混合可实现简单视觉效果）、玩具的功能提示灯等。
四、选型与使用注意事项
- 电路设计：共阴极需注意阳极独立接线，若需同时点亮红蓝（混合紫色），需分别为两个阳极串联限流电阻（因压降不同）。
- 焊接规范：手工焊接温度≤260℃，时间≤3秒；波峰焊需控制焊接时间（避免高温损坏芯体）。
- 存储要求：常温（15~25℃）干燥环境存储，避免静电接触（建议用防静电包装与工具）。
- 过流保护：严禁无限流电阻直接接电源，否则会因过流烧毁LED芯。
XL-A524SURUBW凭借稳定的光/电性能、简单的驱动方式与可靠的封装设计，成为电子设备状态指示领域的实用之选，能满足从DIY制作到工业批量生产的多样化需求。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
