Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-HD3535UBC-A2
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-HD3535UBC-A2
- Type
- XINGLIGHT
- Minimum package
- 1000
Technical parameters
- Power
- 1W
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-HD3535UBC-A2
- Electronic Component
- 1
- Package
- SMD3535-3P
- Electronic Component
- 455nm~470nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.13g
- Electronic Component
- 1
- LED
- 130°
- LED
- Electronic Component
- Electronic Component
- BM0259344598
- Electronic Component
- 465nm
- Operating Temperature
- 40℃~+135℃
- Current
- 350mA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-HD3535UBC-A2 产品概述
一、产品简介
XL-HD3535UBC-A2 是成兴光（Xinglight）推出的一款高功率蓝光贴片发光二极管（SMD3535-3P 封装）。方形 3.5mm×3.5mm 球头透镜设计，透镜透明无色，单颗功率额定 1W，适用于需高亮度、宽发散角的蓝光照明与指示场合。
二、主要性能参数
- 封装型号：SMD3535-3P（3.5mm×3.5mm 方形灯头）
- 发光颜色：蓝色（波长 455nm–470nm，峰值 465nm）
- 正向电流：350mA（典型）
- 功率：1W
- 正向压降（Vf）：3.4V（典型，350mA）
- 发光角度：130°（宽视角）
- 二极管配置：独立二极管
- 载带方式：正贴（适合贴片机取放）
- 工作温度：-40°C ~ +135°C
三、光学与电气特性
XL-HD3535UBC-A2 以 465nm 附近为光谱峰，光色稳定且集中，适合对波长有要求的指示与显示应用。宽 130° 发光角使得出光均匀，适合非聚光的面光源或背光应用。驱动建议采用恒流驱动器，350mA 为典型工作点；为保证可靠性，建议随工作温度做必要的电流降额。
四、封装与热管理
3535 方形封装便于高速贴装与自动化生产。球头透明透镜提升光通量输出与视角均匀性。由于为 1W 级别器件，合理的 PCB 散热设计至关重要：建议在主焊盘下方使用热铜填充与多层散热通孔，并保证良好的热阻路径以控制结温，延长寿命并维持光输出稳定。
五、应用场景
- 工业与仪表指示光源
- 背光与装饰照明（需蓝光效果）
- 医疗、光谱或传感系统中的激发光源（视具体要求）
- 通讯设备指示与高亮显示
六、使用建议与注意事项
- 推荐恒流驱动，避免直接用稳压或仅靠限流电阻长期驱动。
- 在高环境温度下应适当降低驱动电流以防过热。
- 焊接时遵循通用 SMD 回流工艺规范，避免长时间超温；贴装前后注意防潮处理。
- 运输与存储应防静电、防潮；装带式供料适合自动贴装机器。
- 在设计 PCB 时预留足够散热铜箔与通孔，实际热设计应以系统测试为准。
如需更详细的电光参数曲线、热阻或回流焊温度曲线，请提供具体应用环境或向成兴光索取完整规格书与样品测试数据。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
