Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-DZ324SURSYGW/A XL-DZ324SURSYGW
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-DZ324SURSYGW / A
- Type
- XINGLIGHT
- Minimum package
- 1000 袋装
Technical parameters
- Power
- 50mW
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-DZ324SURSYGW/A
- Electronic Component
- 1
- Package
- SIP-3-2.54mm
- Electronic Component
- 620nm~630nm；565nm~575nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.304g
- Electronic Component
- 1
- LED
- 350mcd；250mcd
- LED
- 50°
- LED
- Electronic Component
- Electronic Component
- BM0259344763
- Electronic Component
- 625nm；570nm
- Operating Temperature
- 20℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-DZ324SURSYGW/A 产品概述
XL-DZ324SURSYGW/A 是成兴光（Xinglight）出品的一款直插型 3mm 双色发光二极管（红/黄绿色），采用 SIP-3-2.54mm 封装、共阴极（共阴）引脚布局，适用于指示灯与面板显示等通用照明与指示场景。透镜为无色透明设计，配合内置芯片实现纯净发光，典型视角约 50°，光束集中且均匀。
一、主要规格参数
- 发光颜色：红色、黄绿色（双色共阴）
- 峰值波长：红 625nm，黄绿 570nm
- 波长范围：红 620–630nm，黄绿 565–575nm
- 正向电压 (Vf)：典型 1.8–2.2V
- 正向电流 (If)：典型 20mA（最大）
- 功率：50mW
- 发光强度：红约 350mcd，黄绿约 250mcd（典型）
- 发光角度：50°（半强度角）
- 封装形式：直插 SIP-3，针距 2.54mm，外壳 3mm
- 二极管配置：共阴极（公共阴极管脚）
- 透镜颜色：无色透明
- 工作温度：-20℃ ～ +85℃
二、电气与引脚说明
- 引脚排列（面向发光面，脚朝下）：通常为左侧红色阳极、中心为共阴极、右侧为黄绿色阳极（生产批次请以实物丝印或数据表为准）。
- 驱动建议：单色通道在 20mA 时为典型亮度；为延长寿命与提高可靠性，连续使用时可考虑 10–15mA 的降额驱动。
- 串联限流电阻：按公式 R = (Vcc - Vf) / If 计算。例如 Vcc=5V、Vf≈2.0V、If=20mA 时 R ≈ 150Ω。
- 共阴极接法：将共阴极引脚接地，分别对两侧阳极加正向电压以点亮对应颜色；同时点亮两色可得到混色效果（视觉上偏橙/黄系，受视角与亮度比例影响）。
三、封装与安装
- 直插式 SIP-3（针距 2.54mm）便于插装与波峰焊接，常用于面板、指示灯座与原型板。
- 透镜直径约 3mm，透明外壳利于色彩还原与光通输出。
- 焊接建议：手工焊接峰值温度不超过 260℃，加热时间尽量控制在 3–5 秒以内；避免长期高温烘烤以免影响发光效率。
四、应用场景
适用于家电面板、控制器指示、仪器仪表、通信设备、电子玩具、交通指示、背光指示及通用状态指示等低功耗、小尺寸场合。结构简单、易于驱动，便于批量生产与维护。
五、注意事项与可靠性
- 防静电：为半导体器件，建议在防静电环境中操作、装配与存储。
- 环境适应：工作温度范围为 -20℃ 至 +85℃，高温或严苛户外环境需额外防护或选用更高规格产品。
- 使用寿命：长期高电流、高温工作会加速衰减，建议根据实际亮度要求进行电流降额与散热管理。
- 质量确认：量产前建议进行样机测试，包括焊接兼容性、亮度一致性与颜色匹配测试。
如需完整电气特性曲线、典型光强与驱动曲线、引脚机械尺寸图或样品数据表，请告知，我可根据成兴光官方资料为您准备更详尽的技术文档。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
