Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-304UWC
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-304UWC
- Type
- XINGLIGHT
- Minimum package
- 1000 袋装
Technical parameters
- Power
- 70mW
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-304UWC
- Electronic Component
- 1
- Package
- Through-hole, D=3mm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 6000K~8000K
- Electronic Component
- 0.162g
- Electronic Component
- 1
- LED
- 9cd
- LED
- 25°
- LED
- Electronic Component
- Electronic Component
- BM0230642473
- Operating Temperature
- 20℃~+85℃
- Current
- 20mA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-304UWC 产品概述
一、产品简介
XL-304UWC 是成兴光（Xinglight）推出的一款高亮直插白光发光二极管（F3，3mm圆头），采用无色透明透镜和窄光束设计，适合需要定向、高亮度指示与照明的场合。灯体为插件封装，长脚设计便于面包板实验和机械固定。
二、主要规格
- 发光颜色：白色（冷白）
- 色温：6000K ~ 8000K（偏蓝冷白光）
- 正向电流（IF）：20 mA（典型）
- 正向电压（Vf）：3.2 V（典型）
- 功率：70 mW
- 发光强度：9000 mcd（＠IF=20 mA）
- 发光角度：25°（窄光束）
- 工作温度：-20 ℃ ~ +85 ℃
- 封装/灯头：插件，3 mm 圆形，透明透镜，长脚（便于焊接与固定）
- 品牌：Xinglight（成兴光）
三、光学与电气特性说明
发光强度9000 mcd 与25°光角结合，形成集中、穿透力强的指示光束，适合远距离可见性要求。色温6000–8000K 提供偏冷的白色光，显示细节对比好。典型工作点为IF=20 mA、Vf≈3.2 V；额定功率约70 mW，应通过限流电阻或恒流驱动器控制电流，延长寿命。
示例限流电阻计算（串联电阻）：
- 5 V 电源：R ≈ (5.0 − 3.2) / 0.02 ≈ 90 Ω（可取100 Ω）
- 12 V 电源：R ≈ (12 − 3.2) / 0.02 ≈ 440 Ω（可取470 Ω）
四、典型应用场景
- 工业与家用设备状态指示灯
- 仪表面板、控制台、信号灯与按钮背光
- 便携式设备与手工制作（DIY、教育、原型）
- 各类指示与提示场合要求集束、远距可视的照明点
五、使用建议与注意事项
- 极性识别：通常长脚为阳极，短脚为阴极；封装侧可见扁平面或内凹做极性标识，焊接前请确认。
- 驱动：建议用恒流源或合适限流电阻，避免长时间过流工作。
- 焊接保护：插件焊接时避免长时间高温直接作用于LED封装，焊接完成后应及时冷却。
- 环境与可靠性：工作温度范围为-20~+85 ℃，不建议用于超出该范围的极端环境或关键汽车电子（需更宽温区器件）。
- 防静电与清洁：安装与搬运时注意静电防护，透镜表面若有污迹可用无纤维脱落的干净布轻拭。
XL-304UWC 以其高亮度、窄角度与简单的插件安装特性，适合需要明显指示和定向照明的多种电子与机械应用。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
