Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-B524SURUGC
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-B524SURUGC
- Type
- XINGLIGHT
- Minimum package
- 1000 袋装
Technical parameters
- Power
- 50mW；70mW
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-B524SURUGC
- Electronic Component
- 1
- Package
- Through-hole, D=5mm
- Electronic Component
- 520nm~530nm；620nm~630nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.351g
- Electronic Component
- 1
- LED
- 5cd；22cd
- LED
- 30°
- LED
- Electronic Component
- Electronic Component
- BM0257676175
- Electronic Component
- 625nm；525nm
- Operating Temperature
- 20℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-B524SURUGC 产品概述 — 成兴光 (Xinglight)
一、产品简介
XL-B524SURUGC 是一款直插式 5mm 圆头双色发光二极管（红/翠绿），采用透明无色透镜与共阳极（共阳）二极管配置。其红色与翠绿色单元为高亮型设计，适用于面板指示、仪表、信号指示及小型指示灯应用。封装形式为插件（D=5mm），便于手工焊接和波峰/有选择的插件式自动化装配。
二、主要电光参数
- 发光颜色：红色 / 翠绿色（双色）
- 峰值波长：红 625nm；翠绿 525nm
- 波长范围：红 620–630nm；翠绿 520–530nm
- 正向电压（Vf）：红 约 2.4V；翠绿 约 3.6V
- 正向电流：最大 20mA（典型驱动电流）
- 功率：红 50mW；翠绿 70mW
- 发光强度（典型）：红 5000mcd；翠绿 22000mcd
- 发光角度：30°（窄角高指向性）
- 工作温度：-20℃ ~ +85℃
三、产品特性与优势
- 共阳极设计：便于单端供电与驱动电路简化，适合多色切换与混色控制。
- 透明透镜与 30° 集中发光角度：高指向性、增强亮度感受，适合远距或需要明显指示的场合。
- 高亮度翠绿单元：在同等电流下绿光亮度显著高，便于日间可视性。
- 插件封装：装配和维护方便，适配手工或自动插件线。
四、驱动与选型建议
- 驱动电阻计算（示例）：以 5V 供电驱动翠绿单元（Vf=3.6V，If=20mA）为例，R = (Vcc - Vf) / If = (5.0 - 3.6) / 0.02 = 70Ω，可选标准值 82Ω，建议电阻额定功率 ≥ 0.25W。功耗 P = (Vcc - Vf) × If ≈ 0.028W。
- 注意共阳极接法：共阳即所有阳极共接正极，分别由不同的限流电阻或驱动器接地以控制各色。出货前请参照详细引脚图确认引脚排列与长度。
- 建议在高亮应用及长时间点亮下适当降额（例如将 If 降至 10–15mA）以延长寿命并降低热量。
五、装配与可靠性注意事项
- 焊接：手工焊接建议铁芯温度控制在 350°C 左右，焊接时间尽量短（≤3s）以避免封装热应力。若采用波峰焊，请以供应商焊接规范为准。
- ESD 防护：LED 对静电敏感，装配与测试过程中请采取防静电措施（腕带、工作台接地）。
- 存储：避免高温高湿与直射光，建议环境温度 ≤ 30°C、相对湿度 ≤ 70%。长期存储前建议密封防潮包装。
- 工作环境：产品工作温度范围内可稳定工作，但在高温或高湿环境下应注意散热与封装老化。
六、典型应用
- 仪表与面板指示灯、设备状态指示、家电与办公设备、通信设备前面板、消费电子指示领域等需要双色指示与高指向性的场合。
如需器件引脚图、波形特性曲线或样品测试数据，请联系成兴光（Xinglight）或参考其完整数据手册以获得详细机械尺寸与焊接工艺参数。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
