Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-1608UYC-06FJ
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-1608UYC-06FJ
- Type
- XINGLIGHT
- Minimum package
- 4000 圆盘
Technical parameters
- Power
- 60mW
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-1608UYC-06FJ
- Electronic Component
- 1
- Package
- 603
- Electronic Component
- 587nm~595nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.019g
- Electronic Component
- 1
- LED
- 600mcd
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0259340582
- Electronic Component
- 590nm
- Operating Temperature
- 40℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-1608UYC-06FJ 贴片发光二极管产品概述
一、产品基本信息
XL-1608UYC-06FJ是成兴光（Xinglight） 推出的一款0603封装贴片发光二极管，主打小型化、高亮度黄色发光特性，适配各类紧凑空间的指示类应用。型号中：
- “0603”对应英制封装尺寸（约1.6mm×0.8mm），适合高密度贴装；
- “反极黄”表明其发光颜色为黄色系，部分型号具备反向极性耐受设计（需结合 datasheet 确认）；
- “0.6T”指透镜厚度为0.6mm，可优化发光角度与强度分布。
二、核心电气与光学参数
该LED的关键参数直接决定应用适配性，具体如下：
- 电气特性：正向电流（If）典型值20mA（额定功率60mW），正向压降（Vf）范围1.9V~2.3V（随温度略有波动），满足常规直流驱动需求；
- 光学特性：发光颜色为黄色，峰值波长590nm（人眼敏感的黄光谱段），半峰宽587nm~595nm，发光强度达600mcd（典型值），120°宽角度覆盖较大视野；
- 透镜特性：无色透明透镜，无额外滤光设计，发光效率更高，保持黄色光自然色调。
三、封装与物理特性
- 封装形式：0603贴片封装（含透镜总厚度约0.5mm），体积紧凑，适配小型化设备；
- 载带方式：正贴载带包装，符合SMT自动化生产要求，便于批量贴装；
- 物理细节：透镜厚度0.6mm，可避免光散射过度，提升局部亮度均匀性。
四、典型应用场景
因体积小、亮度高、温度适应性强，该LED广泛用于：
- 消费电子：手机/平板通知灯、无线耳机充电盒状态灯、遥控器功能指示；
- 工业控制：PLC模块状态灯、传感器信号指示、小型仪器仪表显示；
- 汽车电子：仪表盘辅助灯、车载充电器状态灯、车内局部氛围灯；
- 智能家居：智能开关状态灯、传感器节点指示、家电控制面板灯；
- 通信设备：路由器/交换机端口灯、光猫状态指示。
五、环境适应性
工作温度范围为**-40℃~+85℃**，覆盖工业级温度要求，可在低温（北方户外设备）或高温（车载仪表盘）环境下稳定工作；同时具备常规SMT器件的湿度耐受性，适配复杂工况。
六、选型与使用注意事项
- 驱动电路设计：需串联限流电阻，公式为：( R=(V_{cc}-V_f)/I_f )。例如Vcc=5V时，取Vf=2.2V、If=20mA，则R=140Ω（推荐用150Ω标准电阻）；
- 极性确认：常规LED长脚为正、短脚为负，若为“反极”设计需参考型号标识，避免反向过流；
- 功率限制：实际功率不得超过60mW，过流易导致芯片烧毁；
- 贴装工艺：遵循0603封装SMT流程，回流焊温度需符合成兴光 datasheet 要求，避免高温损坏透镜。
总结
XL-1608UYC-06FJ以紧凑体积、高亮度、宽温度范围为核心优势，是消费电子、工业控制等领域小型化指示需求的高性价比选型，可满足各类紧凑空间的状态指示场景。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
