Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Xinglight XL-DZ234SURD/4 XL-DZ234SURD
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Xinglight XL-DZ234SURD / 4
- Type
- XINGLIGHT
- Minimum package
- 1000 袋
Technical parameters
- Power
- 240mW
- Electronic Component
- Electronic Component
- Electronic Component
- XINGLIGHT
- Electronic Component
- XL-DZ234SURD/4
- Electronic Component
- 1
- Package
- DIP-8-2.54mm
- Electronic Component
- 615nm~635nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.996g
- Electronic Component
- 1
- LED
- 480mcd
- LED
- 50°
- LED
- Electronic Component
- Electronic Component
- BM0259344778
- Electronic Component
- 628nm
- Operating Temperature
- 20℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL-DZ234SURD/4 产品概述
一、产品简介
XL-DZ234SURD/4 是成兴光（Xinglight）推出的一款直插式红光发光二极管模块，采用3mm灯珠封装，整合于DIP-8（2.54mm 间距）四孔灯座内，内部为四个独立二极管单元。透镜为红色透镜，发光为“红发红”类型，适合面板指示、仪表指示、状态显示等需要多点独立指示的应用场景。
二、主要光电参数
- 发光颜色：红色（红发红）
- 峰值波长：628nm（光谱范围 615nm–635nm）
- 正向压降（Vf）：1.8V ~ 2.2V（典型值视工作电流和温度而定）
- 正向电流：额定 80mA（单二极管）
- 最高额定功率：240mW（请以产品规格书中具体功率限制为准）
- 发光强度：480mcd（测量条件请参考规格书）
- 发光角度：50°（典型视角）
- 工作温度：-20℃ ~ +85℃
三、封装与机械特性
- 封装形式：直插式 DIP-8，针脚间距 2.54mm
- 灯珠尺寸：3mm 类型透镜
- 二极管配置：四个独立二极管，便于分别驱动或串并联组合使用
- 适配常见面板和通孔插装工艺，便于手工焊接和波峰/选择性回流工艺后的插装固定
四、典型应用场景
- 仪表仪器、面板与机箱状态指示
- 家电、通讯设备指示灯
- 测试与测量设备的多点信号指示
- 教学与电子模型中的多色或多点指示（配合不同颜色产品）
五、使用建议与注意事项
- 驱动：每个二极管须配合限流（恒流）驱动或限流电阻，避免直接并联多个二极管在无限制电源下工作。
示例计算（5V电源）：若按 20mA 工作，R = (5V - 2.0V) / 0.02A ≈ 150Ω；按额定 80mA，R = (5V - 2.0V) / 0.08A ≈ 37.5Ω（须选择合适功率电阻并注意散热）。 - 热管理：高电流工作（接近或达 80mA）时需注意封装与周边环境温升，必要时降额使用或增加散热条件以延长寿命。
- 焊接：作为直插元件，可采用常规通孔焊接工艺；避免长时间高温加热以免影响灯珠光学性能，遵循供应商建议的焊接温度曲线。
- 静电与反向电压：LED 对静电敏感，储存与装配时注意防静电措施；避免超过允许的反向电压以防击穿损坏。
- 环境与可靠性：工作温度范围为 -20℃ 至 +85℃，在极端温度下应进行可靠性验证。
六、选型与采购建议
在选型或批量采购前，建议索取并参考完整规格书（datasheet）以确认：单二极管的引脚排列、最大允许反向电压、脉冲电流能力、老化测试数据以及具体光学测量条件。根据实际使用电流与安装环境选择是否需要降额使用以保证长期可靠性。
如需样品、详细引脚图或配套驱动建议，可联系成兴光（Xinglight）或其授权分销渠道获取技术支持与资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
