Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
XINLUDA XL2551
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- XINLUDA XL2551
- Type
- XINLUDA
- Minimum package
- 2500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- XINLUDA
- Electronic Component
- XL2551
- Electronic Component
- 1
- Package
- SOP-8
- Type
- CAN Transceiver
- Electronic Component
- CAN Transceiver
- Electronic Component
- 0.228g
- Electronic Component
- 1
- Channel Count
- 1
- Features
- ESD; TXD; Low Power
- Electronic Component
- BM0228559606
- Operating Temperature
- 40℃~+85℃
- Operating Voltage
- 4.5V~5.5V
- Operating Current
- 75mA
- Data
- 1Mbps
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XL2551 CAN收发器（SOP-8）产品概述
一、产品简介
XL2551 是信路达（XINLUDA）推出的一款高速 CAN 收发器，封装为 SOP-8。器件支持最高 1 Mbps 的数据速率，工作电压范围 4.5V～5.5V，适用于典型 5V CAN 总线系统。工作温度范围为 -40℃～+85℃，满足工业级应用环境要求。
二、主要参数
- 类型：CAN 收发器
- 数据速率：最高 1 Mbps
- 工作电压：4.5V ～ 5.5V
- 工作电流：典型 75 mA
- 静态电流（待机）：典型 500 μA
- 工作温度：-40℃ ～ +85℃
- 封装：SOP-8
- 品牌：XINLUDA（信路达）
三、特性与功能要点
- 支持高速 CAN 通信，适合汽车电子与工业控制网络的物理层接口。
- 低静态电流设计，便于系统在待机/低功耗模式下运行。
- 5V 宽电压工作，兼容常见控制器供电。
- SOP-8 常见封装，便于批量焊接与自动化装配。
四、应用场景
- 汽车车身控制、车载诊断仪器（非关键安全气囊/刹车系统需按车规件选型）
- 工业自动化总线、PLC 与远程 I/O 通信
- 仪器仪表、楼宇自控、物流与农业机械等需要 CAN 网络的场景
五、典型设计建议
- 在 CANH/CANL 线上使用 120 Ω 终端电阻，并考虑在总线两端各安装一个。
- 在器件 VCC 引脚靠近焊盘处并联 0.1 μF 陶瓷去耦电容和 4.7–10 μF 稳定电容，减小电源干扰。
- 在差分线采用屏蔽双绞线，差分线尽量短且长度匹配，避免急转弯和走线跨分层。
- 建议在近节点处加装共模电感和 TVS 抗浪涌/静电冲击保护器件，提高系统抗扰度。
- 关注热耗散：75 mA 工作电流在 5V 时功耗约 0.375 W，布局时留有散热路径。
六、可靠性与测试建议
- 通过温度循环、ESD（人体模型 ±2kV / >=4kV 机型级别）、浪涌和电磁兼容性测试验证整机稳定性。
- 进行总线短路、开路和突发消息测试，检查收发器在异常条件下的故障安全行为。
七、选型与替代考虑
在需要车规级认证（AEC-Q100）或更严格电磁兼容与高温能力时，建议对比车规 CAN 收发器的规格。XL2551 适合对成本与性能均衡的通用工业与车载非关键应用。
如需进一步的引脚定义、电气特性曲线或参考电路图，可提供更详细的器件手册以便精确设计。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
