Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
XHSC HC32L072KATA-LQFP64 HC32L072KATA
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- XHSC HC32L072KATA-LQFP64
- Type
- LQFP-64(10X10)
- Minimum package
- 1600 托盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- XHSC
- Electronic Component
- HC32L072KATA-LQFP64
- Electronic Component
- 1
- Package
- LQFP-64(10x10)
- Electronic Component
- MCU(MCU / MPU / SOC)
- Electronic Component
- 1.26g
- CPU
- 32 Bit
- CPU
- ARM Cortex-M0+
- I / O
- 50
- RAM
- 16KB
- Electronic Component
- 1
- ADC
- 12bit
- DAC
- 12bit
- Electronic Component
- BM0230027600
- Operating Temperature
- 40℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
HC32L072KATA-LQFP64 产品概述
一、产品简介
HC32L072KATA-LQFP64 是 XHSC(小华) 推出的一款基于 ARM Cortex-M0 核心的低功耗单片机，主频最高可达 48MHz，集成 128KB 的 FLASH 程序存储器和约 16KB 的片上 SRAM（如需精确 SRAM 大小请参见数据手册）。器件适用于对成本、功耗和实时性有平衡要求的嵌入式应用。
二、主要规格
- CPU 内核：ARM Cortex-M0，最高 48MHz
- 存储：128KB FLASH 程序存储器（可在片上存放固件）
- I/O：50 路通用 I/O，适合多路外设连接
- ADC：12 位分辨率，适合中等精度的模数采样
- DAC：12 位分辨率，支持模拟输出控制
- 工作电压：1.8V ~ 5.5V，便于与 1.8V/3.3V/5V 系统连接
- 封装：LQFP-64（10×10 mm）
三、核心特性
该器件以高性价比为主，具备稳定的 32 位处理能力与足够的程序存储空间，适合处理控制逻辑、简单信号处理和通信任务。内置 12-bit ADC/DAC 提供了对模拟信号的采集与输出能力，50 个 I/O 能支持多路传感器、驱动与状态指示。宽电压工作范围提升了系统设计的灵活性。
四、封装与引脚
采用 LQFP-64（10×10）封装，便于常见的贴片工艺和板级布局。64 引脚中包含电源、地、模拟输入/输出、以及大量通用 I/O，适合中等密度的外围接口设计。实际引脚功能分配请参考器件引脚图与数据手册。
五、典型应用
适用于数据采集模块、传感器接口、电机与驱动控制、智能家居和消费电子控制器、低功耗物联网终端等场景。其 ADC/DAC 能满足音频前端、小信号测量与模拟控制需求，50 路 I/O 支持丰富外设扩展。
六、选型与注意事项
选择时请确认 SRAM 大小与实际应用代码、堆栈需求匹配；注意电源滤波与稳压，尤其在 1.8V 与 5V 共存环境下做好电平匹配与保护；对 ADC/DAC 精度敏感的设计应考虑布局与参考电源稳定性。更多详细时序、引脚配置与电气特性，请以官方数据手册为准。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
