Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YLPTEC URB2405S-6WR3 URB2405S
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YLPTEC URB2405S-6WR3
- Type
- SIP-8
- Minimum package
- 22 管
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YLPTEC
- Electronic Component
- URB2405S-6WR3
- Electronic Component
- 1
- Electronic Component
- 12mm
- Package
- SIP-8
- Electronic Component
- Isolated Power Supply Module
- Electronic Component
- 6.8g
- Electronic Component
- 22mm
- Electronic Component
- 9.5mm
- Electronic Component
- 1
- Electronic Component
- BM0257677103
- Operating Temperature
- 40℃~+105℃
- Switching Frequency
- 300kHz
- Electronic Component
- 50mVp-p
- Conversion
- 82%
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
URB2405S-6WR3 产品概述
一、产品简介
URB2405S-6WR3 是 YLPTEC(易川) 推出的一款高可靠性降压型直流转换模块，单通道、5V 输出、额定输出功率 6W。模块采用 SIP-8 封装，体积小巧（22 × 12 × 9.5 mm），适合对空间、功耗和可靠性有较高要求的工业与通信类嵌入式系统。产品经校验通过，性能稳定，便于快速集成。
二、主要规格
- 功能类型：降压型（DC-DC）
- 通道数：1
- 输入电压范围（Vin）：9V ~ 36V
- 输出电压（Vout）：5V（固定）
- 输出电流（最大值）：1.2A
- 输出功率：6W
- 转换效率：典型 82%
- 开关频率：300kHz
- 最大容性负载：1000 μF
- 隔离电压（Vrms）：1500 V
- 工作温度范围：-40 ℃ ~ +105 ℃
- 特性：短路保护、低功耗
- 封装：SIP-8
- 外形尺寸：长度 22 mm，宽度 12 mm，高度 9.5 mm
三、关键特性
- 高效率：典型转换效率 82%，在中高输入电压及中等负载下能有效降低功耗与发热。
- 宽输入范围：9–36V 输入支持多种工业电源与车载电源应用场景。
- 隔离性能：模块具备 1.5kV 隔离等级，可提升系统安全性与干扰抑制能力。
- 保护功能：内置短路保护，增强系统异常时的可靠性与设备保护能力。
- 低功耗设计：待机与轻载时能保持较低能耗，适合对能效有要求的场合。
- 大容性兼容：支持最高 1000 μF 的输出容性负载，便于与电容滤波或维持供电稳定性配合使用。
四、应用场景
- 工业控制与自动化设备的电源模块
- 通信设备与基站前端供电
- 测试与测量仪器的辅助电源
- 车载电子（在允许的温度与电压条件下）
- 嵌入式系统、小型单板计算机的稳压电源
五、机械与可靠性
URB2405S-6WR3 采用 SIP-8 直插封装，适用于标准 PCB 插装或配套插座，尺寸紧凑便于模块化设计。工作温度范围宽 (-40~+105℃)，适应恶劣环境。隔离等级与短路保护等可靠性特性，提升在工业级应用中的长期稳定性。
六、典型应用与注意事项
- 推荐在输入侧使用适当的滤波和反向保护，以减少传导干扰与避免输入电源瞬变引起的损伤。
- 输出端若并联大容量电容（接近 1000 μF），请注意启动与瞬态响应，必要时使用限制启动电流措施。
- 模块为固定 5V 输出，若需更高或更低电压，请参考其他型号或外部后级调整方案。
- 在高温或高负载工况下，应预留足够散热空间，避免长期满载运行导致温升过高。
七、包装与订购信息
品牌：YLPTEC(易川)。封装形式：SIP-8。产品编号：URB2405S-6WR3。如需样品、技术资料或大量采购，请与供应商联系以获取最新的技术手册、可靠性测试报告及可用库存信息。
校验通过，适合需要隔离、防护及小体积稳定降压供电的多种场合。若需更详细的电气特性曲线、引脚定义或参考电路图，可向厂商索取完整数据手册。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
