Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YLCM1006C-101T
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YJYCOIN YLCM1006C-101T
- Type
- YJYCOIN
- Minimum package
- 800 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YJYCOIN
- Electronic Component
- YLCM1006C-101T
- Electronic Component
- 1
- Package
- SMD-4P,10x8.7mm
- Electronic Component
- Common Mode Filter
- Electronic Component
- 1.07g
- Voltage
- 1kV
- Electronic Component
- 1
- Channel Count
- 2
- Electronic Component
- BM0265854756
- Operating Temperature
- 20℃~+125℃
- Current
- 3A
- Inductor@Frequency
- 100uH@100KHz
- @Frequency
- 100Ω@300MHz
- Resistor(DCR)
- 25mΩ
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
YLCM1006C-101T 共模滤波器产品概述
一、产品基本定位与核心标识
YLCM1006C-101T是益嘉源（YJYCOIN）推出的表面贴装式共模滤波器，核心作用是抑制电子设备电源线路中的共模电磁干扰（EMI），适配中小功率电路的噪声管控需求。该产品采用SMD-4P封装，尺寸为8.7×10mm，符合自动化贴装工艺，可集成于各类小型化电子设备的PCB布局中。
二、关键性能参数详解
产品参数直接决定其EMI抑制能力与适用场景，核心指标如下：
- 通道与电感特性：双通道设计（适配双路电源，如AC-L/N线、DC双输出）；100KHz频率下电感值为100uH，可有效衰减中低频段共模噪声。
- 电流与功耗：额定电流3A，满足常规中小功率电路的工作电流需求；直流电阻（DCR）仅25mΩ，低内阻设计大幅降低功率损耗，减少设备发热。
- 高频阻抗特性：300MHz高频段下阻抗达100Ω，针对高频共模噪声具备强衰减能力，覆盖电子设备常见EMI敏感频段。
- 安全与环境适应性：绝缘耐电压1kV（满足基本电气安全要求）；工作温度范围-20℃~+125℃，可适应工业级、车载级等宽温场景。
- 封装尺寸：SMD-4P封装，尺寸8.7×10mm，体积紧凑，适配高密度PCB布局。
三、设计特点与应用优势
- 宽频段噪声覆盖：结合中低频（100KHz）100uH电感与高频（300MHz）100Ω阻抗，无需串联多颗器件即可满足多数场景的EMI抑制需求。
- 低功耗高可靠性：25mΩ低DCR减少电流损耗，提升设备能效；宽温范围与1kV耐电压，确保极端环境下长期稳定运行。
- 双通道简化设计：单颗集成双路滤波，降低PCB布局复杂度，减少物料成本与贴装工序。
- 小型化适配：紧凑封装适配消费电子、通信设备等对体积敏感的产品，无需额外插件空间。
四、典型应用场景
YLCM1006C-101T的性能参数适配以下核心场景：
- 开关电源：AC-DC、DC-DC转换器的输入/输出端滤波，满足EMC认证要求（如CE、FCC）。
- 通信设备：路由器、交换机、基站电源模块滤波，减少高频噪声对信号传输的干扰。
- 工业控制：PLC、变频器等工业设备电源滤波，适应工业环境的宽温与可靠性要求。
- 消费电子：LED驱动电源、电视、机顶盒等产品的EMI抑制，符合国家电磁兼容标准。
五、应用注意事项
- 电流限制：实际工作电流不得超过额定3A，避免过流导致器件发热损坏。
- 贴装工艺：采用常规SMD回流焊工艺，贴装温度曲线需符合器件封装要求（参考益嘉源官方 datasheet）。
- 频率特性：电感值随频率变化（100uH为100KHz典型值），需根据实际噪声频段匹配使用。
- 电压安全：1kV为绝缘耐压（对地/壳），工作电压需控制在电路设计的安全范围内。
该产品通过平衡性能、体积与成本，成为中小功率电子设备EMI滤波的高性价比选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
