Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YLED0402R
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YONGYUTAI YLED0402R
- Type
- YONGYUTAI
- Minimum package
- 3000 圆盘
Technical parameters
- Power
- 60mW
- Electronic Component
- Electronic Component
- Electronic Component
- YONGYUTAI
- Electronic Component
- YLED0402R
- Electronic Component
- 1
- Package
- 0402
- Electronic Component
- 615nm~630nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.023g
- Electronic Component
- 1
- LED
- 250mcd
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0225803790
- Electronic Component
- 645nm
- Operating Temperature
- 40℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
YLED0402R 产品概述
一、产品简介
YLED0402R 是永裕泰（YONGYUTAI）出品的小尺寸表面贴装发光二极管（SMD LED），封装规格为 0402，适用于对体积和功耗要求严格的电子设备。器件为红色发光，透镜为无色透明，发光均匀，视觉效果稳定，适合做指示与微型背光应用。
二、主要电光参数
- 发光颜色：红色
- 峰值波长：645 nm（典型）
- 发射波段：615–630 nm（规格范围）
- 发光强度：250 mcd（典型）
- 发光角度：120°
- 正向电流（If）：20 mA（最大或推荐参考值）
- 正向压降（Vf）：1.8–2.4 V
- 最大功耗：60 mW
- 工作温度：-40 ℃ 至 +85 ℃
- 封装：0402（超小型 SMD）
三、性能与热管理要点
0402 封装体积小，散热能力有限。按最大参数计算，最大功耗 60 mW，若按最大 Vf 2.4 V 与 If 20 mA 计算，耗散功率约 48 mW，仍低于额定功耗。但在实际设计中建议采用电流降额使用以延长寿命与稳定性：常用驱动电流在 1–10 mA 区间；若需 20 mA 驱动，应确保良好 PCB 散热并考虑脉冲驱动以降低结温。
举例（串联限流电阻计算）：以 5 V 电源与期望 If = 10 mA、取 Vf = 2.0 V 时，R = (5.0 − 2.0) / 0.01 = 300 Ω。
四、应用场景
适用于各类小型电子产品指示、面板指示灯、移动设备指示、可穿戴设备、精密仪器、物联网终端、医疗与工业控制指示等场景，尤其在空间受限的 PCB 设计中具备明显优势。
五、封装与装配建议
- 封装 0402，适用自动贴装与回流焊工艺；建议遵循无铅回流温度曲线（峰值 ≤ 260 ℃）并控制回流时间和升温速率以避免封装应力。
- 建议在 PCB 设计时参考厂方推荐焊盘和焊膏量，避免过多焊膏导致浮贴或短路。
- 操作与包装：LED 对静电敏感，应在 ESD 防护环境下搬运，采用防潮包装并在规定时间内回流焊接。
六、选型与采购信息
型号：YLED0402R
品牌：YONGYUTAI（永裕泰）
封装：0402，透明透镜，红色发光。
在选型时，请确认后端驱动电压、电流与期望亮度匹配，并向供应商核实批次的光谱与亮度公差以保证颜色一致性。
如需更详细的电气特性曲线、光强-电流关系或封装尺寸图纸（PCB 焊盘推荐），建议索取厂方规格书（Datasheet）以作为可靠设计依据。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
