Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ZD24C08A-SSGMB
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Zetta ZD24C08A-SSGMB
- Type
- ZETTA
- Minimum package
- 20000 管
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ZETTA
- Electronic Component
- ZD24C08A-SSGMB
- Electronic Component
- 1
- Package
- SOP8 150mil
- Electronic Component
- EEPROM
- Electronic Component
- 2.46g
- Electronic Component
- 1
- Electronic Component
- BM0264500211
- Electronic Component
- 8Kbit
- Operating Temperature
- 40℃~+85℃
- Operating Voltage
- 1.7V~5.5V
- Interface Type
- I2C
- Electronic Component
- 100
- Clock Frequency(fc)
- 1MHz
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
ZD24C08A-SSGMB 串行EEPROM产品概述
ZD24C08A-SSGMB是澜智（Zetta）推出的一款8Kbit容量串行EEPROM，采用标准I2C接口设计，具备宽电压范围、高可靠性、快速写周期等核心优势，适配工业级及消费电子等多场景应用需求。
一、产品定位与核心特性
该产品定位为低成本、高稳定性的非易失性存储器件，核心特性包括：
- 兼容标准I2C总线协议，支持双向数据传输，无需额外控制总线；
- 宽电压工作范围（1.7V~5.5V），适配低功耗MCU及传统5V系统；
- 工业级温度特性（-40℃~+85℃），满足恶劣环境下的稳定运行；
- 长寿命与高可靠性：100万次写周期寿命，25℃下数据保留100年；
- 快速写操作：单次写周期仅需3ms，提升系统存储效率。
二、关键技术参数详解
1. 存储与接口
- 存储容量：8Kbit（即1024字节），采用页写结构（常规页大小为16字节）；
- 接口类型：标准I2C串行接口，支持最高1MHz时钟频率（高速模式）；
- 地址配置：通过A0/A1/A2引脚可设置8种不同设备地址，支持多片级联。
2. 电气特性
- 工作电压：1.7V~5.5V（覆盖低功耗设备及传统5V系统）；
- 写周期时间（Tw）：3ms（页写模式下可同时写入多字节，总写入时间不超过3ms）；
- 待机电流：低至微安级（结合宽电压优化，适合电池供电场景）。
3. 可靠性参数
- 写周期寿命：100万次（可重复擦写次数，满足长期数据更新需求）；
- 数据保留时间（TDR）：100年（25℃环境下，高温环境仍保持10年以上）；
- 工作温度范围：-40℃~+85℃（工业级温宽，适用于户外、车载等场景）。
三、封装与引脚功能
ZD24C08A-SSGMB采用SOP-8表面贴装封装，引脚定义如下（俯视视角，从左至右）：
引脚编号 引脚名称 功能说明 1 A0 地址输入0（接VCC/GND配置地址） 2 A1 地址输入1 3 A2 地址输入2 4 GND 电源地 5 SDA 串行数据线（开漏输出，需10kΩ上拉） 6 SCL 串行时钟线（开漏输出，需10kΩ上拉） 7 WP 写保护（高电平有效，禁止写操作） 8 VCC 电源正极四、典型应用场景
该产品因宽温、宽电压及高可靠性，广泛应用于：
- 工业控制：PLC模块、传感器节点、电机控制器的参数存储；
- 消费电子：智能家居设备（智能开关、传感器）、便携式音频设备的配置存储；
- 汽车电子：车载信息娱乐系统、辅助驾驶模块的临时数据备份；
- 通信设备：路由器、交换机的MAC地址、固件配置存储；
- 医疗设备：小型监测仪器（血糖监测仪）的用户数据存储。
五、使用注意事项
- 地址配置：A0/A1/A2引脚通过接VCC（高）或GND（低）设置8种地址，避免多设备冲突；
- 写保护功能：WP引脚接高电平时禁止写操作，建议系统正常运行时置高；
- 电源稳定性：VCC与GND间并联0.1μF滤波电容，避免电压尖峰；
- 写操作规范：写周期内禁止断电，需等待ACK应答确认写完成后再操作。
ZD24C08A-SSGMB凭借高性价比与稳定性能，成为工业、消费电子等领域非易失性存储的优选器件。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
