Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YANGJIE SL110
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
13
specifications
Core information
- Product name
- YANGJIE SL110
- Type
- SOD-123
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YANGJIE
- Electronic Component
- SL110
- Electronic Component
- 1
- Package
- SOD-123
- Electronic Component
- 0.037g
- Electronic Component
- 1
- Electronic Component
- BM0228973964
- Electronic Component
- Electronic Component
- Electronic Component
- 3000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
SL110 产品概述
一、产品简介
SL110 为 YANGJIE（扬杰）推出的一款独立式肖特基（Schottky）二极管，采用 SOD-123 小型封装。该器件具有低正向压降和快速响应特性，适合在空间受限且对功耗敏感的电源与整流场合使用。标称整流电流为 1A，直流反向耐压 100V，是通用功率整流与保护的优选方案。
二、主要特性
- 低正向压降：Vf ≈ 600mV @ 1A，降低整流损耗，提高效率。
- 中高耐压：VR = 100V，适用于多种中低压电源和开关电源场景。
- 低到中等反向漏流：IR ≈ 500μA @ 100V（常温测量），需在高温工况下考虑漏流上升。
- 峰值浪涌能力：IFSM = 28A（非重复峰值），能承受瞬态冲击电流。
- 宽工作结温：Tj = -55°C ~ +150°C，耐热性能良好。
- 封装：SOD-123，便于自动贴装与波峰/回流焊工艺。
三、电气参数摘要
- 正向压降（Vf）：600mV @ IF = 1A
- 额定整流电流：IF(AV) = 1A（条件依散热与PCB面积而异）
- 反向耐压（VR）：100V
- 反向漏电流（IR）：500μA @ VR = 100V
- 非重复峰值浪涌电流（IFSM）：28A
- 工作结温范围：-55°C ~ +150°C
（注：实际电气性能受环境温度、PCB散热和焊接状况影响，请参照完整数据手册进行详细验证。）
四、封装与热管理
SOD-123 为小型表面贴装封装，适合自动化贴装。由于封装体积和铜箔面积限制，器件的连续载流能力受限，建议在设计时预留足够的 PCB 铜箔作为散热通道（热沉/地平面）。在高环境温度或长时间 1A 负载下，应进行热仿真或实测以确认结温不超限。
五、典型应用
- 开关电源（输出整流、二次侧快恢复）
- 反向保护、倒电保护与电源 OR-ing
- 电池充放电路径保护与整流
- 便携式设备、USB 电源及车载电子的整流与保护
- 二极管钳位、续流管（freewheeling）应用
六、设计与使用建议
- 在高温工况下，注意反向漏流随温度上升而增加，必要时采用带散热的 PCB 设计或并联多只器件分流。
- 避免长时间超过额定电流工作，若需更高持续电流，应选择更大封装或并联器件，并评估不均流影响。
- 焊接时遵循 SOD-123 回流温度曲线与厂家建议，防止过热导致性能退化。
- 对于浪涌或反复脉冲场合，验证 IFSM 与实际冲击能量是否匹配。
七、可靠性与存储
产品设计满足工业级工作温度范围，建议在干燥、常温条件下存储，避免潮湿环境长期暴露。若为潮湿敏感等级（MSL）物料，请按回流前烘烤处理要求操作。
八、采购信息
型号：SL110
品牌：YANGJIE（扬杰）
封装：SOD-123
如需样片、完整数据手册或应用资料，请联系供应商获取最新版规格书与生命周期支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
