Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
cjiang FTC160865S2R2MBCA
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- cjiang FTC160865S2R2MBCA
- Type
- CJIANG
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- CJIANG
- Electronic Component
- FTC160865S2R2MBCA
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- Power Inductor
- Electronic Component
- ±20%
- Electronic Component
- 0.033g
- Inductor
- 2.2uH
- Electronic Component
- 1
- Electronic Component
- BM0264690910
- Current
- 1.3A
- Resistor(DCR)
- 390mΩ
- Electronic Component
- Electronic Component
- Electronic Component
- 3000
- and Current(Isat)
- 1.6A
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
FTC160865S2R2MBCA 产品概述
一、产品简介
FTC160865S2R2MBCA 是长江微电（cjiang）推出的一款微型贴片电感，采用一体成型 T‑CORE 结构与扁线工艺，体积小、结构紧凑。封装规格为 0603，适合空间受限的便携式和移动终端电源与滤波应用。
二、主要规格
- 感值：2.2 μH（公差 ±20%）
- 额定电流：1.3 A（Idc）
- 饱和电流（Isat）：1.6 A（感值下降显著前的参考值）
- 直流电阻（DCR）：约 390 mΩ
规格适配低感值、高可靠性的小电流电源回路。
三、结构与工艺特点
一体成型 T‑CORE 设计提高了机械强度和温稳定性；扁线工艺在相同体积下能获得较低的直流电阻与更好的散热性能。0603 小外形便于高速贴片机装配，适配自动化生产线。
四、性能与典型应用
该件因感值较小且额定电流在 1A 量级，适用于：
- 移动设备的电源滤波与去耦（如 L1 位于降压转换器输出侧）
- EMI 抑制与输入滤波网络
- 小功率 DC‑DC 转换器、传感器供电和继电器驱动前级 注意在接近饱和电流时感值会下降，应考虑电流余量以保证滤波性能。
五、设计与选型建议
- 对于连续工作电流，建议按额定电流 70%–80% 的裕量选型，以避免工作点进入饱和区导致感值下降。
- DCR 较高时会带来一定的功率损耗，需在热设计中考虑发热与散热路径。
- PCB 布局应尽量缩短回流环路，靠近器件放置去耦电容，确保良好接地和低寄生电感。
六、封装、焊接与存储
- 封装：0603 SMD，支持贴片回流焊工艺（含无铅回流）。
- 推荐采用标准贴片封装带盘（tape‑and‑reel）供料，便于高速贴装。
- 储存与搬运按一般贴片无源件要求执行，避免潮湿、强机械冲击；若吸湿需按回流前烘烤处理。
七、采购与技术支持
型号：FTC160865S2R2MBCA，品牌：cjiang（长江微电）。如需样片、封装尺寸图、频率依赖特性曲线或温漂及测试条件等更详细参数，请联系供应商或长江微电技术支持获取完整数据手册与可靠性报告，以便在具体项目中快速验证与量产应用。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
