Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
cjiang FXL0630-1R5-M FXL0630
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- cjiang FXL0630-1R5-M
- Type
- CJIANG
- Minimum package
- 1500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- CJIANG
- Electronic Component
- FXL0630-1R5-M
- Electronic Component
- 1
- Package
- SMD,6.6x7mm
- Type
- Inductor
- Electronic Component
- Power Inductor
- Electronic Component
- ±20%
- Electronic Component
- 0.84g
- Inductor
- 1.5uH
- Electronic Component
- 1
- Electronic Component
- BM0232014252
- Current
- 12A
- Resistor(DCR)
- 12.1mΩ
- Electronic Component
- Electronic Component
- Electronic Component
- 1500
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
FXL0630-1R5-M 产品概述
一、主要参数
- 品牌：cjiang（长江微电）
- 型号：FXL0630-1R5-M
- 类型：一体成型功率电感（SMD）
- 电感值：1.5 µH，公差 ±20%
- 额定电流（Ir）：12 A
- 饱和电流（Isat）：14 A（超过此电流电感值将显著下降）
- 直流电阻（DCR）：12.1 mΩ
- 封装尺寸：SMD，6.6 × 7 mm
二、产品特点
- 高电流承载能力：12 A 额定电流，适合中大电流开关电源与点对点电源模块。
- 低DCR 设计：12.1 mΩ 有利于降低铜损，提高转换效率，但在高电流下仍需考虑导通损耗与散热。
- 一体成型（molded）结构：机械强度与焊接可靠性好，电磁屏蔽和寄生振荡控制优于裸绕线圈。
- 紧凑封装：6.6×7 mm SMD 便于高速自动贴装与高密度 PCB 布局。
三、典型应用
- 同步降压（buck）转换器与电源模块（点对点供电）
- CPU/GPU 外围电源、FPGA、ASIC 的输入/输出滤波或储能元件
- 工业电源、服务器电源、通信基站和车载电子（需结合温度与振动验证）
- LED 驱动器与高功率开关电源
四、热与功耗评估（示例）
在额定电流 12 A 条件下，可近似估算铜损：Pcu ≈ I^2 × DCR = 12^2 × 0.0121 ≈ 1.74 W。
说明：该损耗为直流电阻引起的连续功耗估算，实际系统中开关频率、纹波电流及峰值电流分布会影响平均损耗，必要时应做实际测温与效率验证并预留安全裕度。
五、布板与安装建议
- 将电感靠近开关器件或输入/输出电容安放，尽量缩短高频回路环路面积，降低 EMI。
- 使用足够的铜箔散热（顶层/底层加铜）并考虑过孔散热，以降低结温。
- 过孔尽可能对称布置，焊盘设计遵循厂商推荐焊盘尺寸与回流焊工艺参数。
- 在高脉冲电流应用中，考虑增加屏蔽地或滤波器以抑制干扰。
六、选型要点与注意事项
- 工作电流应以额定电流为基准并留裕量，持续工作接近额定电流会带来较大导通损耗与升温。
- 避免工作点长期接近或超过 Isat（14 A），否则电感值下降会导致电流纹波增大和控制不稳定。
- 若电路对电感精度或温漂敏感，可选择更高精度或更低 DCR 的替代品。
- 在车规或工业级应用，需确认温度循环、振动与湿度下的可靠性数据。
七、包装与采购建议
- 建议向授权代理或厂商获取样品进行实际电气与热测试（包含温升、纹波电流下的感值保持）。
- 结合批量生产需求确认包装形式（盘带、卷装）、保质期与出货测试报告（DCR、Isat、外观）。
FXL0630-1R5-M 以其 1.5 µH/12 A 的电流容量与一体化封装，适合要求高电流、紧凑布局的开关电源与点对点供电场景。在设计中重点关注导通损耗与散热管理，可在保证效率与可靠性的前提下发挥良好性能。若需更详细的电感随直流偏置和频率的特性曲线、温度范围或焊接工艺建议，请向厂商索取完整规格书与试验数据。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
