Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
CCTC TCC1206X7R272K102FT
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
18
specifications
Core information
- Product name
- CCTC TCC1206X7R272K102FT
- Type
- CCTC
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- CCTC
- Electronic Component
- TCC1206X7R272K102FT
- Electronic Component
- 1
- Electronic Component
- 2.7nF
- Package
- 1206
- Electronic Component
- SMD Capacitor(MLCC)
- Electronic Component
- ±10%
- Electronic Component
- 0.045g
- Electronic Component
- 1
- Electronic Component
- BM0264907388
- Electronic Component
- X7R
- Voltage
- 1kV
- Electronic Component
- Electronic Component
- Electronic Component
- 3000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TCC1206X7R272K102FT 产品概述
一、产品简介
TCC1206X7R272K102FT 为 CCTC（三环）出品的高压贴片多层陶瓷电容，封装为 1206（约 3.2×1.6mm），厚度 1.25mm。标称电容值 2.7nF（272），容差 ±10%（K），介质为 X7R，额定直流耐压 1kV，适合在空间受限但需承受较高工作电压的电子设计中使用。
二、主要规格
- 容值：2.7nF（272）
- 容差：±10%（K）
- 额定电压：1000 V DC
- 介质温度系数：X7R（-55°C ~ +125°C，典型电容量随温度变化在 ±15% 范围）
- 封装：1206（厚度 1.25mm）
- 品牌：CCTC（三环）
三、功能特点
- 高工作电压：1kV 额定电压满足高压滤波、耦合与脉冲应用需求。
- 紧凑封装：1206 体积小，便于表贴自动化装配。
- 稳定性合理：X7R 介质在宽温区间内保持较稳定电容，适合一般电源与滤波场合。
- 可批量生产，良好一致性与重复性，适合工业化应用。
四、典型应用场景
- 高压耦合／隔直电容（HV coupling）
- 开关电源高压侧滤波与吸收（snubber）
- 高频脉冲电路与耐压要求较高的测量仪器
- 工业控制与电源模块中的局部去耦与阻尼
五、设计与装配建议
- X7R 为介质电容，受温度与直流偏置影响，建议在设计时预留电容裕量，必要时进行 DC-bias 特性验证。
- 高压应用注意间距与爬电距离，焊盘与邻近元件布局应满足安全与绝缘需求。
- 推荐采用标准回流焊工艺，遵循供应商推荐的温度曲线以避免机械或热应力导致的失效。
- 存储时保持干燥，避免潮湿环境长期暴露；贴片前如超过干燥保质期应进行烘烤处理。
六、可靠性与测试
- 建议在最终应用环境下进行 IR、耐压、温度循环及 DC-bias 下的电容值测量验证。
- 对于关键高压路径，考虑冗余或并联/串联配置以优化电压分布与失效安全性。
若需更详细的电气特性曲线（温度系数、DC-bias 曲线、绝缘电阻、介质损耗 tanδ）或封装图纸与回流焊工艺建议书，可向供应商或经销渠道索取该型号的 Datasheet 以作进一步设计验证。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
