Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Chipanalog CA-IF1034S
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Chipanalog CA-IF1034S
- Type
- CHIPANALOG
- Minimum package
- 2500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- CHIPANALOG
- Electronic Component
- CA-IF1034S
- Electronic Component
- 1
- Package
- SOIC-8
- Type
- CAN Transceiver
- Electronic Component
- CAN Transceiver
- Electronic Component
- 0.186g
- Electronic Component
- 1
- Electronic Component
- BM0265069200
- Operating Temperature
- 40℃~+125℃
- Operating Voltage
- 3V~3.6V
- Operating Current
- 55mA
- Data
- 1Mbps
- Static Current
- 15uA
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
CA-IF1034S 产品概述
一、产品简介
CA-IF1034S 是川土微（Chipanalog）推出的一款高可靠性 CAN 收发器，面向工业级总线通信场景。该器件支持最高 1 Mbps 的数据速率，工作电压范围为 3.0 V 至 3.6 V（典型 3.3 V），工作温度覆盖 -40 ℃ 至 +125 ℃，适用于严苛环境下的车用及工业总线系统。
二、主要参数
- 器件类型：CAN 收发器
- 最大数据速率：1 Mbps
- 工作电压：3.0 V ~ 3.6 V
- 工作电流：典型 55 mA（工作态）
- 静态电流：典型 15 μA（待机/静态态）
- 工作温度：-40 ℃ ~ +125 ℃
- 品牌：Chipanalog（川土微）
- 封装：SOIC-8
三、主要特点
- 支持常见 CAN 总线速率，最高 1 Mbps，满足高速控制与数据交换需求。
- 宽电压工作范围，适配 3.3 V 系统并具备一定的电源容差。
- 低静态电流设计，有利于电源节能与待机应用。
- 宽温度范围和工业级电流规格，适合车载、工业自动化、楼宇控制等场景。
- SOIC-8 标准封装，便于 PCB 布局及 SMT 生产。
四、典型应用
- 汽车电子域控制器、车载通信网关（在满足汽车规范前提下）
- 工业控制网络（PLC、现场总线接口）
- 智能楼宇与安防系统的分布式通信节点
- 医疗设备通信模块、能源管理系统等需要差分总线的场景
五、封装与引脚信息
CA-IF1034S 提供 SOIC-8 封装，封装体积适中，利于自动贴装与散热。常见 CAN 收发器引脚包括 VCC、GND、TXD、RXD、CANH、CANL 等，具体引脚排列和功能请参照器件正式数据手册以确保正确连接与配置。
六、设计与应用建议
- 电源旁路：在 VCC 端并靠近芯片引脚放置 0.1 μF 与 1 μF 陶瓷电容以抑制瞬态干扰。
- 总线终端：在 CAN 总线两端采用 120 Ω 终端电阻进行匹配；必要时并联隔离电阻或共模电感以改善电磁兼容性。
- ESD 与浪涌防护：在总线入口处考虑使用 TVS 二极管和共模电感增强抗干扰能力，尤其是长线或易受雷击环境。
- 布局注意：CANH/CANL 差分走线尽量靠近且长度匹配，远离高频数字信号，使用连续地线平面作为回流。
- 功耗管理：待机静态电流仅 15 μA，可结合外部控制或休眠策略降低系统整体能耗。
七、质量与可靠性
器件工作温度可达 -40 ℃ 至 +125 ℃，满足工业级可靠性需求。实际应用中，请根据工作环境做好热设计与长时间可靠性验证，并参考厂商提供的可靠性与测试数据。
八、采购与技术支持
CA-IF1034S 适合批量生产与工程应用，建议向正规代理或厂商渠道采购以获得完整的数据手册、应用电路与技术支持。对于具体引脚定义、时序图和电气特性曲线，请参考川土微提供的官方器件资料，以完成可靠的硬件设计与系统验证。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
