Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
CrossChip CC6209TO
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
17
specifications
Core information
- Product name
- Cross Chip CC6209TO
- Type
- CROSSCHIP
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- CROSSCHIP
- Electronic Component
- CC6209TO
- Electronic Component
- 1
- Package
- TO-92S
- Electronic Component
- Hall Switch
- Electronic Component
- 0.113g
- Electronic Component
- 1
- Electronic Component
- BM0265576481
- Operating Temperature
- 40℃~+150℃
- Operating Voltage
- 2V~5V
- Operating Current
- 300uA
- Electronic Component
- Electronic Component
- Electronic Component
- 1000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
CrossChip CC6209TO 霍尔线性传感器产品概述
一、产品基本定位与品牌背景
CC6209TO是成都芯进电子（CrossChip）推出的通孔式线性霍尔传感器，属于该品牌通用型霍尔产品线的核心型号。CrossChip作为国内专注霍尔效应传感器研发的厂商，其产品覆盖线性、开关型等品类，CC6209TO针对中低端应用的成本敏感需求设计，同时兼顾宽温适应性与低功耗，是工业、消费电子等领域的高性价比选择。
二、核心性能参数解析
CC6209TO的参数围绕「线性输出、宽温兼容、低功耗」三大特性，具体如下：
- 工作电压：2V~5V，覆盖主流MCU（3.3V/5V单片机）供电区间，无需电平转换，直接适配多数系统；
- 工作电流：典型值300μA（微安级），低功耗显著降低系统能耗，适合电池供电设备；
- 工作温度：-40℃+150℃，覆盖工业级（-4085℃）与部分汽车附件级（-40~125℃）场景，稳定工作于高温车间、户外设备；
- 线性特性：输出电压与垂直封装顶面的磁场强度线性对应，满足中精度检测（位置、位移、电流间接测量）；
- 封装：TO-92S-3通孔封装，3引脚（通常1脚VCC、2脚GND、3脚OUT），兼容传统PCB焊接，安装便捷。
三、典型应用场景
基于参数特性，CC6209TO可应用于：
- 工业自动化：电机转子位置检测、气缸活塞位移监测、低压导线电流检测（无接触）；
- 消费电子：家电角度调节（电风扇摇头）、便携式磁场探测器；
- 汽车附件：低成本子系统（后备箱开关、座椅调节位置检测）；
- 电池设备：户外手持仪器、无线传感器节点的磁场/位置检测；
- 安防物联网：智能门锁接近距离检测、工业物联网节点磁场监测。
四、封装与可靠性设计
- TO-92S-3封装优势：通孔焊接稳定性高，抗振动能力优于贴片，适合工业振动环境；引脚间距合理，避免短路；
- 宽温可靠性：经过高低温循环测试，-40℃无性能漂移，+150℃输出稳定；
- 抗干扰能力：内置基础EMI抑制电路，适应电机、变频器等强干扰场景；
- 无接触检测：磁场感应无机械磨损，寿命长于光电传感器，维护成本低。
五、应用设计注意事项
- 电源滤波：VCC引脚并联100nF陶瓷电容到GND，滤除电源噪声；
- 磁场方向：确保磁场源与封装顶面垂直（输出与垂直磁场线性相关）；
- 引脚核对：参考官方datasheet确认引脚顺序（避免接反损坏）；
- 温度补偿：高精度需求（±0.5%FS）可通过外部运放或MCU算法补偿。
总结
CC6209TO是一款性价比突出的线性霍尔传感器，以宽温、低功耗、通用封装为核心优势，覆盖多领域中精度检测场景。其设计兼顾成本与性能，是替代进口同类产品的高性价比选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
