Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
EVERLIGHT 19-213/Y2C-CQ2R2L/5T 19-213
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- EVERLIGHT 19-213 / Y2C-CQ2R2L / 5T
- Type
- EVERLIGHT
- Minimum package
- 5000 圆盘
Technical parameters
- Power
- 60mW
- Electronic Component
- Electronic Component
- Electronic Component
- EVERLIGHT
- Electronic Component
- 19-213/Y2C-CQ2R2L/5T
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- 585.5nm~594.5nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.027g
- Electronic Component
- 1
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0226062389
- Electronic Component
- 591nm
- Operating Temperature
- 40℃~+85℃
- Current
- 25mA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
EVERLIGHT 19-213/Y2C-CQ2R2L/5T 产品概述
一、产品简介
19-213/Y2C-CQ2R2L/5T 为台湾亿光（EVERLIGHT）出品的贴片黄色发光二极管，封装规格为0603（约1.6 × 0.8 mm），独立二极管结构、无色透明透镜，发光角度宽达120°，峰值波长591 nm（波长范围585.5–594.5 nm），适用于微型指示与面板背光等小型照明与指示场景。
二、主要电学与光学参数
- 发光颜色：黄色
- 峰值波长：591 nm（585.5–594.5 nm）
- 正向电压 Vf：1.7–2.3 V
- 额定正向电流 If：25 mA（最大）
- 功率耗散：60 mW（最大）
- 发光角度：120°
- 工作温度：-40 ℃ ~ +85 ℃
三、性能与特点
- 小尺寸0603封装，适合集成密集布局与高密度PCB设计。
- 宽视角（120°）提供均匀照明效果，适合指示灯与面板照明。
- 透明透镜保证色彩纯正、光效损失小。
- 宽工作温度范围，可靠性好，适用工业与消费类环境。
四、应用建议与使用注意
- 驱动与限流：建议外接恒流源或串联限流电阻。限流电阻示例（取If = 20 mA）：R ≈ (Vcc − Vf)/If，例如Vcc=5V且按Vf=1.9V计算，R ≈ 155 Ω。考虑Vf tolerance，请以最小Vf计算以保证不超流。
- 热管理：在If=25 mA时器件耗散接近额定60 mW，PCB铜箔散热与焊盘面积设计有助于延长寿命。
- 焊接工艺：推荐按无铅回流曲线规范控制峰值温度与保温时间，避免过热造成光衰或封装应力。
- 防静电与储存：属于ESD敏感器件，操作环境建议佩戴防静电设备；干燥保存以防潮。
五、封装与配套建议
- 0603（1608公制）标准封装，推荐对应PCB焊盘尺寸与焊膏量，以确保良好焊接与可靠的热传导。
- 如需长寿命与高亮度驱动，建议采用恒流驱动、适当降额（If ≤ 20 mA）并增加散热铜箔。
如需更详细的电光参数曲线、回流焊曲线或PCB封装建议图，请提供用途与电源条件，我可为您提供针对性的设计建议与计算。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
